Fracture toughness determination of adhesive and co-cured joints in natural fibre composites
نویسنده
چکیده
Departamento de Engenharia Mecânica, Instituto Superior de Engenharia do Porto, Instituto Politécnico do Porto, Rua Dr. António Bernardino de Almeida, 431, 4200-072 Porto, Portugal b Faculdade de Economia e Gestão, Universidade Lusófona do Porto, Rua Augusto Rosa, 24, 4000-098 Porto, Portugal c Faculdade de Engenharia da Universidade do Porto, Rua Dr. Roberto Frias, s/n, 4200-465 Porto, Portugal d INEGI – Instituto de Engenharia Mecânica e Gestão Industrial, Rua Dr. Roberto Frias, 400, 4200-465 Porto, Portugal
منابع مشابه
Failure Mode and Analysis of the Bonded/bolted Joints between a Hybrid Fibre Reinforced Polymer and Aluminium Alloy
Composites are being used extensively in several engineering applications. However, the efficiency of the joints used in joining composites and metals can be improved. To move towards a sustainable and environment friendly future, natural fibre composite material was used. Towards the above objective, research work was carried out for the assembly between a composite and aluminium. Three differ...
متن کاملMathematical modeling of the fracture toughness of phenol formaldehyde composites reinforced with E-spheres
The fracture toughness of SLG filled phenolic composites have been determined by short bar tests. It is expensive to prepare the samples for the tests. Therefore, it is necessary to develop a mathematical model that will predict the fracture toughness of particulate filled phenolic composites. Mathematical models for tensile strength, Young’s modulus are available but not for impact strength an...
متن کاملThe toughness of epoxy polymers and fibre composites modified with rubber microparticles and silica nanoparticles
The present paper investigates the effect of adding silica nanoparticles to an anhydride-cured epoxy polymer in bulk and when used as the matrix of carbonand glass-fibre reinforced composites. The formation of ‘hybrid’ epoxy polymers, containing both silica nanoparticles and carboxyl-terminated butadiene-acrylonitrile (CTBN) rubber microparticles, is also discussed. The structure/property relat...
متن کاملNumerical Determination of Delamination Onset in Laminated Symmetric DCB Specimen
In this study, a novel numerical method is proposed for determination of mode-I interlaminar fracture toughness, GIc, in multi-directional (MD) double cantilever beam (DCB) specimens using fracture properties of unidirectional DCB specimens. Two factors, β and Dc are defined to minimize the undesirable effects on strain energy release rate. β describes the difference between maximum and average...
متن کاملAdhesive Tensile And Moisture Absorption Characteristics Of Natural Fibres Reinforced Urea Formaldehyde Composites
Natural fibers are gaining the interest of scientist and engineering in packaging, low cost housing and other general applications. In the present study, adhesive tensile and moisture absorption properties of randomly distributed areca fibre and maize powder reinforced urea formaldehyde composites has been investigated. Composites were prepared by hydraulic hot press at 150C and 100 bar pressur...
متن کامل