Experimental investigation of dynamic contact angle and capillary rise in tubes with circular and noncircular cross sections.

نویسندگان

  • Mohammad Heshmati
  • Mohammad Piri
چکیده

An extensive experimental study of the kinetics of capillary rise in borosilicate glass tubes of different sizes and cross-sectional shapes using various fluid systems and tube tilt angles is presented. The investigation is focused on the direct measurement of dynamic contact angle and its variation with the velocity of the moving meniscus (or capillary number) in capillary rise experiments. We investigated this relationship for different invading fluid densities, viscosities, and surface tensions. For circular tubes, the measured dynamic contact angles were used to obtain rise-versus-time values that agree more closely with their experimental counterparts (also reported in this study) than those predicted by Washburn equation using a fixed value of contact angle. We study the predictive capabilities of four empirical correlations available in the literature for velocity-dependence of dynamic contact angle by comparing their predicted trends against our measured values. We also present measurements of rise in noncircular capillary tubes where rapid advancement of arc menisci in the corners ahead of main terminal meniscus impacts the dynamics of rise. Using the extensive set of experimental data generated in this study, a new general empirical trend is presented for variation of normalized rise with dynamic contact angle that can be used in, for instance, dynamic pore-scale models of flow in porous media to predict multiphase flow behavior.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Crashworthiness design of multi-cell tapered tubes using response surface methodology

In this article, crashworthiness performance and crushing behavior of tapered structures with four internal reinforcing plates under axial and oblique dynamic loadings have been investigated. These structures have a tapered form with five cross sections of square, hexagonal, octagonal, decagon and circular shape. In the first step, finite element simulations performed in LS-DYNA were validated ...

متن کامل

Simplified Approach for Torsional Analysis of Non-homogenous Tubes with Non-circular Cross-sections

In this paper a method is presented for torsional analysis of non-homogeneous tubes with arbitrarily shaped cross-sections. A previously presented method based on Bredt’s theory is extended to achieve formulas for torsional analysis. Shear modulus varies through the thickness according to a power law distribution. To validate the accuracy of the presented formulas for angle of twist and shear s...

متن کامل

Modeling & Comparison of Mechanical Behavior of Foam Filled & Hollow Aluminum Tubes by LS-DYNA & Introducing a Neural Network Model

Energy absorption capability of thin-walled structures with various cross sections has been considered by researchers up to now. These structures as energy absorbers are used widely in different industries such as automotive and aerospace and protect passengers and goods against impact. In this paper, mechanical behavior of thin-walled aluminum tubes with and without polyurethane foam filler su...

متن کامل

Axial Crush of Metallic and Hybrid Energy Absorbing Thin-walled Tubes with Polygonal Cross-sections: Numerical Analysis

Material properties and geometry are two important design parameters which their effects should be considered in a crashworthiness analysis. In this paper, the axial impact of metallic and hybrid energy absorbing thin-walled tubes with poly-gonal cross-section is simulated using LS-DYNA software. The combined effects of changing the geometry and material properties on the mass specific energ...

متن کامل

شبیه‌سازی عددی انتقال حرارت و افت فشار در مبدل حرارتی پوسته و لوله با دستۀ لولۀ بیضوی

Shell and tube heat exchanger, singular baffles have been stimulated by means of the computational fluid dynamic technique and Fluent software. Several elliptical cross sections for the tubes are examined. So each model drawn by using Gambit software. In stimulating, 3D meshes is used for irregular Couper and tetrahedral networks. Also the performance of each of two shell and tube exchanger is ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Langmuir : the ACS journal of surfaces and colloids

دوره 30 47  شماره 

صفحات  -

تاریخ انتشار 2014