Silk-fibronectin protein alloy fibres support cell adhesion and viability as a high strength, matrix fibre analogue

نویسندگان

  • Matthew M. Jacobsen
  • David Li
  • Nae Gyune Rim
  • Daniel Backman
  • Michael L. Smith
  • Joyce Y. Wong
چکیده

Silk is a natural polymer with broad utility in biomedical applications because it exhibits general biocompatibility and high tensile material properties. While mechanical integrity is important for most biomaterial applications, proper function and integration also requires biomaterial incorporation into complex surrounding tissues for many physiologically relevant processes such as wound healing. In this study, we spin silk fibroin into a protein alloy fibre with whole fibronectin using wet spinning approaches in order to synergize their respective strength and cell interaction capabilities. Results demonstrate that silk fibroin alone is a poor adhesive surface for fibroblasts, endothelial cells, and vascular smooth muscle cells in the absence of serum. However, significantly improved cell attachment is observed to silk-fibronectin alloy fibres without serum present while not compromising the fibres' mechanical integrity. Additionally, cell viability is improved up to six fold on alloy fibres when serum is present while migration and spreading generally increase as well. These findings demonstrate the utility of composite protein alloys as inexpensive and effective means to create durable, biologically active biomaterials.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Interactions between Spider Silk and Cells – NIH/3T3 Fibroblasts Seeded on Miniature Weaving Frames

BACKGROUND Several materials have been used for tissue engineering purposes, since the ideal matrix depends on the desired tissue. Silk biomaterials have come to focus due to their great mechanical properties. As untreated silkworm silk has been found to be quite immunogenic, an alternative could be spider silk. Not only does it own unique mechanical properties, its biocompatibility has been sh...

متن کامل

Intrinsic tensile properties of cocoon silk fibres can be estimated by removing flaws through repeated tensile tests.

Silk fibres from silkworm cocoons have lower strength than spider silk and have received less attention as a source of high-performance fibres. In this work, we have used an innovative procedure to eliminate the flaws gradually of a single fibre specimen by retesting the unbroken portion of the fibre, after each fracture test. This was done multiple times so that the final test may provide the ...

متن کامل

New biotextiles for tissue engineering: development, characterization and in vitro cellular viability.

This work proposes biodegradable textile-based structures for tissue engineering applications. We describe the use of two polymers, polybutylene succinate (PBS) proposed as a viable multifilamentand silk fibroin (SF), to produce fibre-based finely tuned porous architectures by weft knitting. PBS is here proposed as a viable extruded multifilament fibre to be processed by a textile-based technol...

متن کامل

Hemp Fibres as Novel Green Support Material for Immobilization of Acidithiobacillus ferrooxidans

The suitability of hemp fibres as green support material for immobilization of Acidithiobacillus ferrooxidans cells in ferrous iron bio-oxidation process was investigated. A series of experiments were carried out in shake flasks and bioreactor for both cell immobilization and iron bio-oxidation. In flask experiments, five successive batch colonization cycles resulted in 6-fold increase...

متن کامل

Fabrication and performance of natural fibers: Sansevieria cylindrica, waste silk, jute and drumstick vegetable fibres (Moringa Oleifera) reinforced with rubber/polyester composites

Aim of this work was to investigate the tensile, flexural and dielectric properties of composites made by reinforcing Sansevieria cylindrica as a new natural fibre into a rubber based polyester matrix. The fibres extracted by retting and manual processes were used to fabricate the composites. These composites were tested for the properties which mentioned above and compared with those of establ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 7  شماره 

صفحات  -

تاریخ انتشار 2017