Novel actuators based on polypyrrole/carbide-derived carbon hybrid materials
نویسندگان
چکیده
Polypyrrole (PPy) hybrid films incorporated with porous carbide-derived carbon (CDC) particles are synthesized through a novel one-step electrochemical synthesis process that provides a simple and efficient alternative for current tape-casting and inkjet printing technologies to make conducting polymer-CDC-based electroactive composites. The resulting porous, robust and electrically conductive hybrid layer was used to fabricate electroactive polymer actuators both as perpendicularly expanding actuators and as bending trilayer actuators. Raman and FTIR spectroscopy confirm successful incorporation of CDC in the PPy matrix. Cyclic voltammograms confirm slightly higher charging/discharging currents of the PPyCDC hybrid. This indicates the successful coupling of CDC in order to increase electric double-layer capacitance in the hybrid films. The maximum steady state electromechanical diametrical strain is 13% for hybrid material which is in the same order of magnitude as for PPy and 10x more than previously reported CDC films made with non-conducting polymer binders. Furthermore, the expanding actuators made from hybrid material are more efficient than non-modified PPy actuators, having doubled the amount of swelling per injected charge.
منابع مشابه
Nanoporous Carbide-Derived Carbon Material-Based Linear Actuators
Devices using electroactive polymer-supported carbon material can be exploited as alternatives to conventional electromechanical actuators in applications where electromechanical actuators have some serious deficiencies. One of the numerous examples is precise microactuators. In this paper, we show for first time the dilatometric effect in nanocomposite material actuators containing carbide-der...
متن کاملPaper Actuators Made with Cellulose and Hybrid Materials
Recently, cellulose has been re-discovered as a smart material that can be used as sensor and actuator materials, which is termed electro-active paper (EAPap). This paper reports recent advances in paper actuators made with cellulose and hybrid materials such as multi-walled carbon nanotubes, conducting polymers and ionic liquids. Two distinct actuator principles in EAPap actuators are demonstr...
متن کاملFacile Synthesis of Non-Graphitizable Polypyrrole-Derived Carbon/Carbon Nanotubes for Lithium-ion Batteries
Graphite is usually used as an anode material in the commercial lithium ion batteries (LIBs). The relatively low lithium storage capacity of 372 mAh g(-1) and the confined rate capability however limit its large-scale applications in electrical vehicles and hybrid electrical vehicles. As results, exploring novel carbon-based anode materials with improved reversible capacity for high-energy-dens...
متن کاملSynthesis of calcium carbide-derived carbon by mechanochemical reaction of calcium carbide with sulfur, iron sulfide and zinc oxide
In the present work, we report a novel design and preparation for the mechanochemical synthesis of calcium carbide-derived carbon (CaC2-CDC) at ambient temperature. Thermodynamic calculations confirmed the possibility of calcium carbide-derived carbon formation by the reaction of calcium carbide with sulfur, iron sulfide and zinc oxide at ambient temperature. The CDCs were synthesized by the ba...
متن کامل