WADD TR 60-782 PART XXIII VAPORIZATION OF COMPOUNDS AND ALLOYS AT HIGH TEMPERATURES PART XXIII. THERMOCHEMICAL STUDY OF THE GERMANIUM OXIDES USING A MASS SPECTROMETER - THE DISSOCIATION ENERGY OF THE MOLECULE GeO
نویسنده
چکیده
The mass spectromctnc study of the vaporization of the compounds GeO (hex) and GeO(am) and of the mixture GeO (hex) + Ge(c) made it *Z possible to establish their mode of vaporization: Ge02(hex) GeO(g) + 1/20 (I) n GeO(am) (GeO) (g) (n 1. 2. 3) (II) n n/2 GeOJhex) + n/2 Ge(c) (GeO) (g) (n = 1,2,3) (III) c. n The enthalpies of vaporization are AH° (I) 121. 2± 1.6 kcal/mole AH» (II, n=l) = 53.4 ± 1. 0 kcal/mole AH» u(III, n 1) 58. 2 ± 1. 0 kcal/mole 2 90 The polynie rization energies are AHJ (GeO-GcO) = 44. 7 ± 3. 0 kcal/mole AH° (GeO-GeO-GeO) -88. 5 ± 5. 0 kcal/mole 298 Total pressures given in the literature were reinterpreted taking the presence of the polymers into account.
منابع مشابه
Study of the Mechanism and Causes of Pore Formation in Sr-modified Al-Si Alloys
The formation of microporosity in modified Al-Si alloys has been reviewed in the present study. A major concern in modification is the increased tendency to form microporosity in the macro-shrinkage free Al-Si alloy castings. It has also been demonstrated that at low hydrogen contents (0.1cc/ 100g, Al), where only shrinkage porosity should occur, the effect of Sr-modification on porosity conten...
متن کاملStudy of the Mechanism and Causes of Pore Formation in Sr-modified Al-Si Alloys
The formation of microporosity in modified Al-Si alloys has been reviewed in the present study. A major concern in modification is the increased tendency to form microporosity in the macro-shrinkage free Al-Si alloy castings. It has also been demonstrated that at low hydrogen contents (0.1cc/ 100g, Al), where only shrinkage porosity should occur, the effect of Sr-modification on porosity conten...
متن کاملVaporization of Compounds and Alloys at High Temperatures Part Xxi. Mass Spectrometric Studies of the Vaporization of the Sulphides of Calcium, Strontium and Barium
CaS, SrS and BaS bsvm bean araporatad and the Tapor analyzed bgr aaaa apeotroaatrj. The following thanoehaalcal data «ara obtained: D^SjP-TTtf; Dl(CaS)-73.m.5; D;(3rS)-74.1±4.5j p;(BaS)-94.7±4.5i AH(dlJB.BaS)-113.9±5i ^H298nv(CaS)-U8.0±5; AH29eTlip(SrS)-U3.0±5; AH298Tap(BaS)-122.5±5; Dl(CaO)-84.A±6; lC(SxO)-92.2±6; Dl(BaO)=130.4±6; D*(SO)-123.5 kcal per sole. Thie technical docueentary report h...
متن کاملVacuum Brazing of Zirconium-Based Alloy and 321 Stainless Steel Using Titanium Based Filler Metal
Both Zirconium-based alloys and 321stainless steel are widely used as engineering alloys due to their good mechanical properties. Conventional fusion welding techniques for Zr alloys and stainless steel are not feasible due to the formation of brittle intermetallic compounds such as (Zr3Fe, ZrFe2 and Zr2Fe) and corrosion cracking. Brazing is one of the most wide...
متن کاملEffect of Temperature on Diffusion-Bonded Joint of AZ31 Magnesium and 7075 Aluminum Alloy
In this study, the effect of temperature on the diffusion welding of AZ31 magnesium alloy and 7075 aluminum was discussed. Diffusion welding temperature was the most important parameter since all mechanisms are sensitive to temperature in Diffusion welding method. Intrusive contacts between the two alloys at temperatures of 430, and 440 °C 450 and took 60 min. In all tests constant pressure and...
متن کامل