On the Geometrical Properties of the Chromospheric Network

نویسنده

  • F. BERRILLI
چکیده

A sequence of Ca K images obtained in a period of minimum solar activity , from July to November 1996, at the Rome Observatory with the PSPT (Precision Solar Photometric Telescope) prototype instrument have been used to analyze the geometrical properties of cells identiied by the chromospheric network. In particular , we used 256 256 sub-arrays of the calibrated full disk PSPT images. These sub-arrays, centered on the solar disk, are reduced to two-levels (binary) images by means of a suitable threshold after an FFT highpass ltering. A medial axis transform , better known as skeleton, combined to a cellular automaton, is applied to the two-levels images, in order to derive the cell boundaries. The regions corresponding to the cells are then lled by a growing algorithm. In this way we can derive a set of output parameters describing the cells geometry. The size distribution of the iden-tiied cells shows a continuos increase toward the smaller scales, rather than a small dispersion around a characteristic scale. Nevertheless the analysis of the intercell distances and of the area distribution pointed out a characteristic scale (square root of the area) of 24 Mm. To describe the cells irregularity and to probe the nature of solar turbulence we apply a Mandelbrot fractal analysis to such irregularly shaped features. Examining the cells perimeter-area relationship we found the existence of a `critical' area at which a change in the geometrical properties occurs. This area corresponds to the scale of 24 Mm. The estimated fractal dimension for cells with area greater than thècritical' is 1.36. This value, close to that predicted for isobars in the Kolmogorov 3-D turbulent theory, does not exclude a turbulent origin for such cells. The analysis seems to point out a common origin for solar granulation and supergranulation.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Extension of Excavation Damaged Zone Due to Longwall Working Effect

In advance longwall mining, the safety of mine network, production rate, and consequently, economic conditions of a mine are dependent on the stability conditions of gate roadways. The gate roadway stability is a function of two important factors: 1) characteristics of the excavation damaged zone (EDZ) above the gate roadway and 2) loading effect due to the caving zone (CZ) above the longwall w...

متن کامل

Some geometrical properties of the oscillator group

‎We consider the oscillator group equipped with‎ ‎a biinvariant Lorentzian metric‎. ‎Some geometrical properties of this space and the harmonicity properties of left-invariant vector fields on this space are determined‎. ‎In some cases‎, ‎all these vector fields are critical points for the energy functional‎ ‎restricted to vector fields‎. ‎Left-invariant vector fields defining harmonic maps are...

متن کامل

Geometrical Deformation Analysis of Gotvand-Olya Dam Using Permanent Geodetic Monitoring Network Observations

  In this paper, two-dimensional deformation analysis of the Gotvand-Olya dam is done using daily, monthly, seasonal and annual displacement vectors derived from permanent observations of the dam geodetic monitoring network.  The strain tensor and its invariant parameters like dilatation and maximum shear are computed as well. Nonlinear finite element interpolation based on C1 Cubic Bezier int...

متن کامل

Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm

One of sheet severe plastic deformation (SPD) operation, namely constrained groove pressing (CGP), is investigated here in order to specify the optimum values for geometrical variables of this process on pure aluminium sheets. With this regard, two different objective functions, i.e. the uniformity in the effective strain distribution and the necessary force per unit weight of the specimen, are...

متن کامل

ANN BASED MODELING FOR HIGH STRENGTH CONCRETE BEAMS WITH SURFACE MOUNTED FRP LAMINATES

This study focuses on using an artificial neural network (ANN) based model for predicting the performance of high strength concrete (HSC) beams strengthened with surface mounted FRP laminates. Eight input parameters such as geometrical properties of the beam and mechanical properties of FRP laminates were considered for this study. Back propagation network with Lavenberg-Marquardt algorithm has...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008