Hafnium and tantalum carbides for high temperature solar receivers
نویسندگان
چکیده
Related Articles Transformation of concentrated sunlight into laser radiation on small parabolic concentrators J. Renewable Sustainable Energy 3, 053102 (2011) A photovoltaic system with three solar cells and a band-stop optical filter J. Renewable Sustainable Energy 3, 023113 (2011) Parametric analysis of a coupled photovoltaic/thermal concentrating solar collector for electricity generation J. Appl. Phys. 108, 114907 (2010) Solar collector basics J. Renewable Sustainable Energy 1, 043112 (2009)
منابع مشابه
Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite
TaC and HfC are thought to have the highest melting point (~4000°C) among all refractory materials. The binary solid solution of TaC and HfC (Ta4HfC5) is also considered as the most refractory material with the melting point over 4000 °C and valuable physical and mechanical properties. The main goal of this work is to fabricate TaC/HfCbased composites which consolidated by means of spark plasma...
متن کاملPorous and dense Hafnium and Zirconium Ultra-High Temperature Ceramics for solar receivers
The present work reports on the comparative characterization of optical properties of hafnium and zirconium-based ultra-refractory ceramics at room and high temperature, in view of their possible use in novel solar receivers for thermal solar plants operating at higher temperatures. We show how porosity and surface finishing affect both the spectral reflectance and the high-temperature emittanc...
متن کاملThermal Analysis of Tantalum Carbide-Hafnium Carbide Solid Solutions from Room Temperature to 1400 C
The thermogravimetric analysis on TaC, HfC, and their solid solutions has been carried out in air up to 1400 ◦C. Three solid solution compositions have been chosen: 80TaC-20 vol % HfC (T80H20), 50TaC-50 vol % HfC (T50H50), and 20TaC-80 vol % HfC (T20H80), in addition to pure TaC and HfC. Solid solutions exhibit better oxidation resistance than the pure carbides. The onset of oxidation is delaye...
متن کاملThermodynamic and Kinetic Studies for a Refractory Materials Program
Work during 1963 is reported and the work from mid-1960 reviewed on a comprehensive program of thermodynamic and kinetic studies necessary to the theoretical consideration to temperatures of 3000K of the reactions of the zirconium and hafnium carbides and borides with oxygenor halogen-containing atmospheres. ; • Work presented includes: preparation of borides and carbides; low ', temperature he...
متن کاملFacility for assessing spectral normal emittance of solid materials at high temperature.
Spectral emittance is a key topic in the study of new compositions, depositions, and mechanical machining of materials for solar absorption and for renewable energies in general. The present work reports on the realization and testing of a new experimental facility for the measurement of directional spectral emittance in the range of 2.5-20 μm. Our setup provides emittance spectral information ...
متن کامل