Detection of Soot Using a Resistivity Sensor Device Employing Thermophoretic Particle Deposition
نویسندگان
چکیده
Doina Lutic, Joakim Pagels, Robert Bjorklund, Peter Josza, Jacobus Visser, Ann W Grant, Mats L Johansson, Jaska Paaso, Per-Erik Fägerman, Mehri Sanati and Anita Lloyd Spetz, Detection of Soot Using a Resistivity Sensor Device Employing Thermophoretic Particle Deposition, 2010, Journal of Sensors, (2010), 421072, . http://dx.doi.org/10.1155/2010/421072 Licensee: Hindawi Publishing Corporation http://www.hindawi.com/
منابع مشابه
Numerical modeling of the deposition of combustion-generated soot particles on cold wall surfaces
The build-up of soot deposits on cold wall surfaces is a problem of unknown significance for combustion applications. Soot deposits are due to thermophoretic transport and are generally ignored in theoretical and numerical analysis. We examine here the relationship between the rate of soot deposition and the wall convective heat flux, using both Direct Numerical Simulation (DNS) and Large Eddy ...
متن کاملA Potential Soot Mass Determination Method from Resistivity Measurement of Thermophoretically Deposited Soot
Miniaturized detection systems for nanometer-sized airborne particles are in demand, as in applications for onboard diagnostics downstream particulate filters in modern diesel engines. A soot sensor based on resistivity measurements was developed and characterized. This involved generation of soot particles with properties similar to diesel engines using a quenched co-flow diffusion flame; depo...
متن کاملA Novel Particulate Matter 2.5 Sensor Based on Surface Acoustic Wave Technology
Design, fabrication and experiments of a miniature particulate matter (PM) 2.5 sensor based on the surface acoustic wave (SAW) technology were proposed. The sensor contains a virtual impactor (VI) for particle separation, a thermophoretic precipitator (TP) for PM2.5 capture and a SAW sensor chip for PM2.5 mass detection. The separation performance of the VI was evaluated by using the finite ele...
متن کاملPressure dependence of primary soot particle size determined using thermophoretic sampling in laminar methane-air diffusion flames
Optical techniques, such as the light extinction and scattering as well as the laser-induced incandescence and the spectral soot emission, have been used routinely to measure soot concentrations in atmospheric flames. Laser-induced incandescence and light scattering have been proven to measure the primary soot particle size as well in atmospheric flames; however, using these two techniques for ...
متن کاملSoot Formation in Laminar Partially Premixed Coflow Flames by Thermophoretic Particle Densitometry
The formation of soot particles in combustion depends on several factors that include: pressure, temperature, fuel chemical structure and extent of premixing. An improved version of the thermophoretic particle densitometry (TPD) method, has been used in this study for quantitative and qualitative characterization of soot particles generated in laminar partially-premixed co-flow flames having di...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- J. Sensors
دوره 2010 شماره
صفحات -
تاریخ انتشار 2010