Generic Spice Compatible Model of Current Feedback in Switch Mode Convertors
نویسنده
چکیده
frequency to retain the triangular shape of the inductor current. It will be assumed in the following, therefore, that.the output signal of amplifier A, includes a remnant of the inductor current triangular waveform (except for possible curvature of the corners) multiplied by a constant (kJ. In CM realisation (Fig. 2), the output of the error amplifier V;, modified by a 'compensation slope' Mc [1] is compared to the inductor current IL having a rising slope k,ml' a falling slope k,m2 and low frequency component A. The average
منابع مشابه
Spice Simulation of Ouasi-resonant Zero-current -switching Dc-dc Convertors
A simple, topology-independent method is proposed for simulating the responses of open and closed-loop quasiresonant DC-DC convertors operating in the zero-currentswitching mode (ZCS-QRC). The method hinges on the substitution of the resonant network and switch assembly, fundamental in the realisation of such systems, by an equivalent circuit which represents its average behaviour. This permits...
متن کاملSpice Compatible Model for Multiple Coupled Nonuniform Transmission Lines Application in Transient Analysis of VLSI Circuits
An SPICE compatible model for multiple coupled nonuniform lossless transmission lines (TL's) is presented. The method of the modeling is based on the steplines approximation of the nonuniform TLs and quasi-TEM assumptions. Using steplines approximation the system of coupled nonuniform TLs is subdivided into arbitrary large number of coupled uniform lines (steplines) with different characteristi...
متن کاملThe “ PWM Switch ” concept included in mode transitioning
Vatché Vorpérian, from the Jet Propulsory Laboratory (Passadena, CA), introduced his PWM Switch model concept in the 90’s. At that time, he derived an invariant three-terminal model that could be inserted in any converter featuring a power switch and a diode. Thanks to his approach, solving ac transfer functions of complex converters became easier, compared to the former State-Space Averaging t...
متن کاملA Tutorial Introduction to Simulating Current Mode Power Stages
SPICE simulation of Current Mode Control (CMC) switch Mode Power Supplies (SMPS) is certainly not a new topic. A lot of people have contributed to make this domain affordable to the design engineer and nowadays EDA packages are shipped with comprehensive dedicated libraries. However, in lack of a tutorial documentation, the choice and the implementation of the models is not always obvious to th...
متن کاملMacro-model Based SPICE Simulation of DC/DC Switching Regulators
A macro-model is a simplified model that emulates functional characteristics of a device or circuit, and widely used in system-level simulation. In this paper, macro-model based SPICE simulation of DC/DC switching regulators is presented. Macro-models of a power switch and Pulse Width Modulation (PWM) control circuit are described. Two simulation examples are given to demonstrate the capability...
متن کامل