Technique for the electric and magnetic parameter measurement of powdered materials
نویسندگان
چکیده
A measurement technique for the electric and magnetic properties of powdered ferrites has been developed. This technique allows one to determine relative permittivity and permeability of powdered materials. Measurements were taken in a coaxial transmission line, which guarantees the broadband frequency measurements. The calculations were based on evaluation of the scattering parameters of measured powdered material and two plastic walls. The values of relative permittivity (ε’, ε”) and permeability (μ’, μ”) have been done for ferrite powder in the frequency range from 200 MHz to 1200 MHz.
منابع مشابه
Bending analysis of magneto-electro-thermo-elastic functionally graded nanobeam based on first order shear deformation theory
In this research, analysis of nonlocal magneto-electro-thermo-elastic of a functionally graded nanobeamdue to magneto-electro-elastic loads has been done. In order to formulate the problem the Timoshenko theory of beams is utilized. The principle of virtual work, Hamilton’s principle as well as nonlocal magneto-electro-thermo-elastic relations has been recruited to derive the governing eq...
متن کاملطراحی و ساخت دستگاه اندازه گیری شدت میدان های الکتریکی و مغناطیسی به منظور ارزیابی سلامت شاغلین و مردمِ در معرض این میدان ها
In the extremely low frequency range (3 to 300 Hz), the intensities of electric and magnetic fields increase with increasing voltage and current. If the intensities of electric and magnetic fields are high compared with standard exposure limits, they can have harmful effects on human health. In the vicinity of power lines and high voltage power stations, the intensities of these fields are usua...
متن کاملDetermining fractal parameter and depth of magnetic sources for ardabil geothermal area using aeromagnetic data by de-fractal approach
The Ardabil geothermal area is located in the northwest of Iran, which hosts several hot springs. It is situated mostly around the Sabalan Mountain. The Sabalan geothermal area is now under investigation for the geothermal electric power generation. It is characterized by its high thermal gradient and high heat flow. In this study, our aim is to determine the fractal parameter and top and botto...
متن کاملMeasurement and simulation of magnetic field strenght in the nano magnetic abrasive finishing process
Magnetic abrasive finishing can be classified as a non-traditional super finishing method for finishing surfaces with different shapes and working materials like flat plates, shafts, bearings parts, screws, tubes and many other mechanical parts that need good surface finishing properties. MAF is effective in polishing, cleaning, deburring and burnishing metal parts. The most important parameter...
متن کاملEmploying dual frequency phase sensitive demodulation technique to improve the accuracy of voltage measurement in magnetic induction tomography and designing a labratoary prototype
Magnetic induction tomography (MIT) is a promising modality for noninvasive imaging due to its contactless technology. Being a non-contact safe imaging technique, MIT has been an appropriate method in compare to other electrical tomography. In this imaging method, a primary magnetic field is applied by excitation coils to induce eddy currents in the material to be studied and a secondary magnet...
متن کامل