Adsorption of methyl mercaptan on surface modified activated carbon.

نویسندگان

  • Hisashi Tamai
  • Hisato Nagoya
  • Takeshi Shiono
چکیده

The influence of surface modification of activated carbon on the adsorption of methyl mercaptan in N(2) was investigated. The modification of the activated carbon was carried out by treatment with HNO(3)/H(2)SO(4) solutions, heat-treatment in Ar, and adsorption of cetylamine. Acid-treatment increased the adsorption of methyl mercaptan compared with the original activated carbon, and the adsorbed amounts increased with ratio of H(2)SO(4) in HNO(3)/H(2)SO(4) solutions. This result suggests that hydrogen bonding between acidic groups formed by acid-treatment and thiol groups of methyl mercaptan plays a role in adsorption of methyl mercaptan on activated carbon.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Catalytic Properties of Activated Carbon Surface in the Process of Adsorption/oxidation of Methyl Mercaptan

This research focuses on activated carbons as adsorbents and catalysts for the removal of methyl mercaptan (MM) – odoriferous sulfur-containing compound commonly added to natural gas for leak detection purposes. Activated carbons are well known for their exceptional ability to adsorb some acidic gases. The application of activated carbons to remove hydrogen sulfide (one of the natural gas conta...

متن کامل

Modification of activated carbon by cold plasma and its effect on the adsorption of toluene

Abstract Background and aims: Clean air is one of the basic needs for human health and well-being. However, along with economic growth and development, transportation, urbanization and energy consumption have also risen and provide many concerns such as air pollution, which require urgent and wide attention. Air pollution in the worldwide is considered as a risk factor for human health and one...

متن کامل

Experimental Investigation and Modeling of CO2 Adsorption Using Modified Activated Carbon

In this research, Activated Carbon (AC) was modified using a sodium hydroxide solution for CO2 adsorption. Adsorption experiments were carried out in a batch reactor at a temperature range of 20-80°C and a pressure range of 2-10 bars to investigate kinetic, isotherm, and thermodynamic of the CO2 adsorption process. Activated carbon was modified with NaOH solution conce...

متن کامل

Removal of Methyl Orange Dye from Aqueous Solution by a Low-Cost Activated Carbon Prepared from Mahagoni (Swietenia mahagoni) Bark

This study utilized Swietenia mahagoni bark–a wood processing industry waste, for the preparation of activated carbon, and then investigated for the removal of methyl orange (MO) dye by the Swietenia mahagoni bark activated carbon (SMBAC). The effect of pH (3–10), adsorbent dose (1–30 g/L), initial MO dye concentration (10–100 mg/L), and contact time (1–240 min) were evaluated...

متن کامل

Removal of Methyl Orange Dye from Aqueous Solution by a Low-Cost Activated Carbon Prepared from Mahagoni (Swietenia mahagoni) Bark

This study utilized Swietenia mahagoni bark–a wood processing industry waste, for the preparation of activated carbon, and then investigated for the removal of methyl orange (MO) dye by the Swietenia mahagoni bark activated carbon (SMBAC). The effect of pH (3–10), adsorbent dose (1–30 g/L), initial MO dye concentration (10–100 mg/L), and contact time (1–240 min) were evaluated...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of colloid and interface science

دوره 300 2  شماره 

صفحات  -

تاریخ انتشار 2006