Floor Heave Mechanism of Gob-Side Entry Retaining with Fully-Mechanized Backfilling Mining

نویسندگان

  • Peng Gong
  • Zhanguo Ma
  • Xiaoyan Ni
  • Ray Ruichong Zhang
چکیده

Serious floor heave in gob-side entry retaining (GER) with fully-mechanized gangue backfilling mining affects the transportation and ventilation safety of the mine. A theoretical mechanical model for the floor of gob-backfilled GER was established. The effects of the mechanical properties of floor strata, the granular compaction of backfilling area (BFA), the vertical support of roadside support body (RSB), and the stress concentration of the solid coal on the floor heave of the gob-backfilled GER were studied. The results show that the floor heave increases with the increase of the coal seam buried depth, and decreases with the increase of the floor rock elastic modulus. The development depth of the plastic zone decreases with the increase of the c and φ value of the floor rock, and increases with the increase of the stress concentration factor of the solid coal. The development depth of the plastic zone in the test mine reached 2.68 m. The field test and monitoring results indicate that the comprehensive control scheme of adjusting backfilling pressure, deep grouting reinforcement, shallow opening stress relief slots, and surface pouring can effectively control the floor heave. The roof-floor displacement is reduced by 73.8% compared to that with the original support scheme. The roadway section meets the design and application requirements when the deformation stabilizes, demonstrating the rationality of the mechanical model. The research results overcome the technical bottleneck of floor heave control of fully-mechanized backfilling GER, providing a reliable basis for the design of a floor heave control scheme.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Strata behavior at fully-mechanized coal mining and solid backfilling face

Taking Ping Dingshan Coal Mine Group 12 as an example, this paper explains the system layout, key equipment and backfilling technology in detail. It probes into the characteristic of rock strata movement behavior and surface deformation above the gob area through in-site measurement method. The results show that as the overburden strata are effectively supported by the backfill body in mined ou...

متن کامل

Application of a Backfilling Method in Coal Mining to Realise an Ecologically Sensitive “Black Gold” Industry

China, as the largest coal-producing and -consuming country in the world, is highly dependent on its coal industry, or “Black Gold” industry, for the national energy and economy. The consequent environmental crises, however, have persisted for decades, and the most serious effect is surface subsidence induced by underground mining. Underground coal excavation in China has ignored this problem f...

متن کامل

Geotechnical considerations for concurrent pillar recovery in close-distance multiple seams

Room-and-pillar mining with pillar recovery has historically been associated with more than 25% of all ground fall fatalities in underground coal mines in the United States. The risk of ground falls during pillar recovery increases in multiple-seam mining conditions. The hazards associated with pillar recovery in multiple-seam mining include roof cutters, roof falls, rib rolls, coal outbursts, ...

متن کامل

Analysis on Filling Ratio and Shield Supporting Pressure for Overburden Movement Control in Coal Mining with Compacted Backfilling

Since the weight of overburden is sustained by both the backfill body and the unmined solid coal in coal mining with compacted backfilling (CMCB) panels, the stress and deformation characteristics of the surrounding rocks in coal mining are radically changed. The overburden movement control mechanism by coordinating with backfill body and shield in CMCB was studied systematically in this paper....

متن کامل

Deformation Monitoring of Waste-Rock-Backfilled Mining Gob for Ground Control

Backfill mining is an effective option to mitigate ground subsidence, especially for mining under surface infrastructure, such as buildings, dams, rivers and railways. To evaluate its performance, continual long-term field monitoring of the deformation of backfilled gob is important to satisfy strict public scrutiny. Based on industrial Ethernet, a real-time monitoring system was established to...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017