Improved Design of a DFB Raman Fibre Laser
نویسندگان
چکیده
A Raman fibre laser based on phase shifted DFB structures is modelled for the first time. Using parameters of realistic devices, the model predicts low-threshold and highly-efficient laser output. The change of position and width of the phase shift were found to have a substantial impact on laser performance.
منابع مشابه
Design Considerations for a Dfb Fibre Laser Based High Sensitivity Broadband Hydrophone
Over the last three decades extensive research has been carried out towards the design and development of fibre optic hydrophones. The inherent advantages of fibre optic sensing technology, like high sensitivity, immunity to electromagnetic interference, intrinsic safety to water leakage, remote measurement capability etc. makes it an ideal choice for underwater acoustic sensing[1, 2]. The init...
متن کاملCharacterisation of random DFB Raman laser amplifier for WDM transmission.
We perform a full numerical characterisation of half-open cavity random DFB Raman fibre laser amplifier schemes for WDM transmission in terms of signal power variation, noise and nonlinear impairments, showcasing the excellent potential of this scheme to provide amplification for DWDM transmission with very low gain variation.
متن کاملOptimised design of a fibre-based pulse compressor for gain-switched DFB laser pulses at 1.5 μm
An optical-fibre based pulse compressor for gain-switched DFB laser pulses has been optimised using a systematic procedure based on the initial complete characterisation of the laser pulses, followed by numerical simulations of the pulse propagation in different types of fibre to determine the required lengths for optimum compression. Using both linear and nonlinear compression techniques, an o...
متن کاملProject Number: 658982 Project Acronym: CHAOS Project title: Nonlinear Compensation in Hybrid Raman/EDFA Amplified Optical Systems List of publications generated in the context of the aforementioned project: 1. Impact of front-FBG reflectivity in Raman fiber laser based amplification
We experimentally analyze the impact of front-FBG reflectivity in ultra-long Raman laser amplifiers performance, showing Q-factor penalties in excess of 1 dB for FBG reflectivities above 10% in a 30 GBaud DP-QPSK transmission system. © 2016 OSA. DOCUMENT TYPE: Conference Paper 2. Impact of input FBG reflectivity and forward pump power on RIN transfer in ultralong Raman laser amplifiers (2016) O...
متن کاملHigh Power 1300 nm Fabry-Perot and DFB Ridge Waveguide Lasers
In this paper we summarize the results [1] on the development of high power 1300 nm ridge waveguide Fabry-Perot and distributed-feedback (DFB) lasers. Improved performance of MOCVD grown InGaAsP/InP laser structures and optimization of the ridge waveguide design allowed us to achieve more than 800 mW output power from 1300 nm single mode Fabry-Perot lasers. Despite the fact that the beam aspect...
متن کامل