Blank in Original
ثبت نشده
چکیده
منابع مشابه
Initial blank design of deep drawn orthotropic materials using inverse finite element method
In this work, an inverse finite element formulation was modified for considering material anisotropy in obtaining blank shape and forming severity of deep drawn orthotropic parts. In this procedure, geometry of final part and thickness of initial blank sheet were known. After applying ideal forming formulations between material points of initial blank and final shape, an equation system was obt...
متن کاملExtension of the standard addition method by blank addition.
Standard addition involves adding varying amounts of the analyte to sample portions of fixed mass or fixed volume and submitting those portions to the sample preparation procedure. After measuring the final extract solutions, the observed signals are linearly regressed on the spiked amounts. The original unknown amount is estimated by the opposite of the abscissa intercept of the fitted straigh...
متن کاملThe Effect of Ridges to Improve Ductility and Reduce Deformation Energy in Deep-Drawing Process
In this research, two new methods that improve the drawing depth of deep-drawing processes have been introduced. In the first technique, by creating ridges on the punch surface, the stress concentration is decreased on the blank near the punch edge, in turn increasing the drawing depth. The second method is based on the principle of reducing resistant force in the flange area between the die, t...
متن کاملAn Investigation into the Deep Drawing of Fiber-Metal Laminates based on Glass Fiber Reinforced Polypropylene
Abstract Fiber-metal laminates (FMLs) are new type of composite materials which could improve defects of traditional composites in ductility, formability, impact and damage tolerance. Drawing behavior of a thermoplastic based FML was investigated consisting of glass-fiber reinforced polypropylene composite laminate and aluminum AA1200-O as the core and skin layers, respectively. The effects o...
متن کاملA Novel Approach for Formability Prediction of Tailor Welded Blank
Formability of Tailor Welded Blank (TWB) is an important parameter which limits this kind of blanks usage. A forming criterion for tailor welded blank is presented based on the analytical model in this research. This criterion suggests Limit Strength Ratio (LSR) and Limit Thickness Ratio (LTR) for forming limit of TWB. When thickness ratio or strength ratio in tailor welded blank is greater tha...
متن کامل