SARASWAT et al: IMPACT OF BRASS AND ELECTROPLATING INDUSTRY WASTEWATER ON SOIL
نویسندگان
چکیده
A field study was conducted at three sites (S1-S3) of 500m longitudinal transect along the drain, where soil was irrigated by toxic metal rich brass and electroplating industrial effluent in suburban area of Moradabad, India. Spatial and seasonal variations of total heavy metal content in soil and their effect on physico-chemical and biological properties were studied in soil samples taken from 0-25, 25-50 and 50-75 cm soil depth. Except pH, all parameters were maximum in summer in surface soil at each site. Total metal content decreased with increasing distance from the effluent course. Physico-chemical values (pH, EC, C org , available N etc.) were found minimum at S1 and maximum at S3. Significant inhibition of microbial biomass C and N, respiration, dehydrogenase activity and microbial coefficient occurred in soils highly contaminated by heavy metals. There was a significant decrease in C mic /N mic ratio and an increase in metabolic quotient (qCO 2 ) with increasing metal concentration.
منابع مشابه
Using Taguchi Experimental Design Method for Obtaining Suitable Thickness in Decora-tive Chromium Electroplating
In this study, Taguchi experimental design has been used for the optimization of thickness of chromium layers. For this purpose brass materials have been electroplated under various conditions of the process. An orthogonal array (OA) was employed to analyze the effect of plating parameters on the characteristic of the thickness. Variables which were considered for working were as following; amo...
متن کاملWhy use Ionic Liquids for Electrodeposition?
With any great voyage of discovery the explorer should always be asked at the outset “Why are you doing this?” To answer the question “Why use ionic liquids for electrodeposition?” it is first necessary to look at current best practice and find its limitations. It is widely recognised that in 1805 Italian chemist, Luigi Brugnatelli made the first experiments in what we now know as electroplatin...
متن کاملBiogas production from plant biomass used for phytoremediation of industrial wastes.
In present study, potentials of water hyacinth (Eichhornia crassipes) and water chestnut (Trapa bispinnosa) employed for phytoremediation of toxic metal rich brass and electroplating industry effluent, were examined in terms of biogas generation. Inability of the plants to grow in undiluted effluent directed to select 20%, 40% and 60% effluent concentrations (with deionized water) for phytoreme...
متن کاملElectrodeposition of Thin Film Cu-Zn Shape Memory Alloys
Cu-Zn alloys have been electrodeposited from a pyrophosphate electrolyte containing Cu2P207> Zn2P207 salts and an excess of K4P2O7 and KN03. Current-potential data for both copper and zinc, as well their plating current efficiencies were determined from electrochemical polarisation experiments. Copper deposition commenced at potentials below -0.208 V whereas zinc was deposited only below -1.157...
متن کاملApproximate Theory of Four-Point Alternating Current Potential Drop on a Flat Metal Surface
An analytical expression for the voltage measured by a four-point alternating current potential drop (ACPD) method on a flat metal surface is derived. Far-field expressions for the electric field in a metal plate and in the region of the probe (air) are used to obtain contributions to the ACPD voltage from the metal plate and due to inductance in the pick-up circuit. The far-field approximation...
متن کامل