nsights into the modeling of adsorption isotherm systems

نویسندگان

  • Y. Foo
  • B. H. Hameed
چکیده

Concern about environmental protection has increased over the years from a global viewpoint. To date, the prevalence of adsorption separation in the environmental chemistry remains an aesthetic attention and consideration abroad the nations, owning to its low initial cost, simplicity of design, ease of operation, insensitivity to toxic substances and complete removal of pollutants even from dilute solutions.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column

In this work, zeolite 13X with porosity structure has been used as an adsorbent for adsorption of CO2 flue gas. The effect of operating conditions including pressure and time on adsorption capacity were investigated. The experiments conditions are constant temperature, the range of pressure 1 - 9 bar and the registration of adsorption capacity with passing of time. Experimental data were adjust...

متن کامل

Modeling of adsorption in hydrophobic interaction chromatography systems using a preferential interaction quadratic isotherm.

A preferential interaction quadratic isotherm model for hydrophobic interaction chromatographic systems is presented in this paper. In this isotherm, the nonlinear effect of salt on the capacity factor is described using the preferential interaction model developed by Perkins et al. [J. Chromatogr. A, 766 (1997) 1]. This is then coupled with a quadratic nonlinear isotherm to describe nonlinear ...

متن کامل

A modified Langmuir-Freundlich isotherm model for simulating pH-dependent adsorption effects.

Analytical isotherm equations such as Langmuir and Freundlich isotherms are widely used for modeling adsorption data. However, these isotherms are primarily useful for simulating data collected at a fixed pH value and cannot be easily adapted to simulate pH-dependent adsorption effects. Therefore, most adsorption studies currently use numerical surface-complexation models (SCMs), which are more...

متن کامل

Modeling and Comparison of Optimized Isotherm Models for H2, N2, CO, CH4 and CO2 Adsorption Using Cuckoo Search Optimization Algorithm

In this study, modeling of hydrogen, nitrogen, carbon monoxide, methane and carbon dioxide sorption on UTSA-16 framework extrudates in the pressure swing adsorption process was carried out. The pure gas adsorption of these gases at the pressure range (0 to 80) bars at (298, 313, and 338) K have also been measured in a fixed bed. Langmuir, Toth, Sips, UNILAN, Virial and Dubinin-Astakhov adsorpti...

متن کامل

Mathematical Modeling of Single and Multi-Component Adsorption Fixed Beds to Rigorously Predict the Mass Transfer Zone and Breakthrough Curves

The aim of the present work is to prepare an adsorption package to simulate adsorption / desorption operation for both single and multi-component systems in an isothermal condition by different mechanisms such as; local adsorption theory and mass transfer resistance (rigorous and approximated methods). Different mass transfer resistance mechanisms of pore, solid and bidispersed diffusion, t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009