Changes in the surface roughness of snow from millimetre to metre scales

The roughness of snow influences themovement of air across the snow surface and resulting transfers of energy. Here we focus on the roughness of the snowpack surface to determine its range of variability for different snow conditions (e.g., time since last snowfall), across spatial scales that ranged from 0.01 cm (card) tomore than 1000 cm (transect) or more than 5-orders of magnitude, and due to the deposition of aeolian constituents. Digital photogrammetry of snow surfaces was used to compute two roughness metrics at two mountain sites in north-central Colorado. These metrics are the random roughness (RR) that disregards the spatial structure and the fractal dimension (D) computed from variogram analysis. At the crystal scale, D is between 1.67 (card) and 1.60 (board), which increases to 1.77 between 0.1 and 1.0 cm. At longer scales, D is 1.53 (board) to 1.56 (transect). There was no significant change in surface roughness during the accumulation season, with RR values at about 0.002. During the melt season the surface roughness doubled, with the RR values increasing from about 0.002 to 0.004. Snow was more rough parallel to the wind when dunes were present, and roughness varied spatially. The average RR value computed for the white snow surface of 0.014 is substantially greater than the value computed for the red dust surface of 0.0032. Due to undulations of smaller amplitude and as a result of the dust itself, the red dust surface is more random (D is 2.62 versus 2.23 for thewhite snow). Our results show that there is consistency in roughness over different scales, yet large scale processes (e.g., wind and radiation activity) influence the magnitude of roughness metrics much more than small scale processes (e.g., crystal form and metamorphism). 2009 Elsevier B.V. All rights reserved.