Materializing a Design with Plywood
نویسندگان
چکیده
This paper is presentation of resulting physical models that were used to explore the relationship between design modeling in CAD and digital fabrication with plywood sheets. We explored a process in making tabletop models with digital fabrication machines and thin plywood sheets. Each was built from combination of predetermined wood joining techniques and structures. These models are believed work as simulation of full scale constructs that inform CAD modeling. Results illustrate the limited potential of parametric modeling and inform fabrication and assembly of design variations.
منابع مشابه
On Bending Tests of Five - Ply
K-factor has Ions been used as a modifier of section modulus In the calculation of bending moment for plywood beams. No comparable modification of moment ot inertia is included In current reoommendatioDS for calculating plywood deflection at span-depth ratios of 30: 1 or greater. Results of limited testing lend support 'to the authors' contention that, where "shear" strains are signifIcant, the...
متن کاملSuitability of Muli Bamboo (Melocanna baccifera) for Making Bamboo Mat Plywood
This paper investigated the potentiality of muli (Melocanna baccifera) for making bamboo mat plywood. Bamboo mat plywood with the length, width and thickness of 2.4 m × 1.2 m × 7 mm was made using liquid urea formaldehyde resin. The physical and mechanical properties of such plywood were compared with the existing market plywood. The average density of bamboo mat plywood was much higher compare...
متن کاملSTATIC AND DYNAMIC PROPERTIES OF FIRE - RESISTANT WOODEN STRUCTURAL ELEMENTS October 1966
A series of treated and untreated laminated Douglas fir beams and plywood panels were subjected to static and dynamic loads to study the effects of pressureimpregnation with fire-retardant chemicals on the mechanical properties of wood and to extend the existing knowledge cf the dynamic properties of wood. Results from the beam tests indicate that designs should be based on use under wet condit...
متن کاملPredicting Bending Strength of Fire-Retardant-Treated Plywood From Screw- Withdrawal Tests
This report describes the development of a test method and predictive model to estimate the residual bending strength of fire-retardant-treated plywood roof sheathing from measurement of screw-withdrawal force. The preferred test methodology is described in detail. Models were developed to predict loss in mean and lower prediction bounds for plywood bending strength as a function of a screw-wit...
متن کاملStability of plywood webs of box girder beams
Laboratory tests on relatively small plywood box beams are described. The results suggest that stability of the plywood webs of more realistically sized box beams is not ensured by the rules in timber design codes. A literature search failed to produce sufficient relevant material on plywood panel stability. Hence, the decision to proceed with the theoretical program whose preliminary steps are...
متن کامل