Thermal strain analysis of an electronics package using the SEM Moiré technique
نویسنده
چکیده
This paper reports on a study of the scanning electron microscope (SEM) Moiré method. Tests were carried out by rotating the specimen grating slightly with respect to the electron scanning raster lines, to verify that the Moiré images captured were really due to the interference between specimen and reference gratings. The experimental results coincided well with the calculated theoretical values and with small measurement errors. Then, the shear strains experienced by the solder joints of a flip-chip ball grid array specimen were investigated using the SEM Moiré method. The results were compared with those obtained using the optical Moiré
منابع مشابه
Comparative Analysis of BGA Deformations and Strains Using Digital Image Correlation and Moiré Interferometry
The thermo-mechanical behavior of BGA solder joints under thermal cycling is characterized by using full field optical measurement techniques, namely Moiré Interferometry (MI) and Digital Image Correlation (DIC), and each technique’s advantages and disadvantages are discussed. Moiré Interferometry has been widely used in the electronics packaging for development and reliability assessment. Its ...
متن کاملAn Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique
This research presents temperature distribution and thermal strain of functionally graded material cylinders with varying thickness and temperature-dependency properties that are subjected to heat fluxes in their inner and outer layers. The heterogeneous distribution of properties is modeled as a power function. Using first-order temperature theory and the energy method, governing equations are...
متن کاملDevelopment of Moiré Interferometry for Real-time Observation of Nonlinear Thermal Deformations of Solder and Solder Assembly
Title of Dissertation: DEVELOPMENT OF MOIRÉ INTERFEROMETRY FOR REAL-TIME OBSERVATION OF NONLINEAR THERMAL DEFORMATIONS OF SOLDER AND SOLDER ASSEMBLY Seungmin Cho, Doctor of Philosophy, 2005 Dissertation Directed By: Associate Professor Bongtae Han, Department of Mechanical Engineering An experimental apparatus using moiré interferometry is developed to characterize the thermo-mechanical behavio...
متن کاملAN INVESTIGATION OF BGA ELECTRONIC PACKAGING USING MOIRÉ INTERFEROMETRY by NORMAN RIVERS A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science in Mechanical Engineering
As technology progresses towards smaller electronic packages, thermomechanical considerations pose a challenge to package designers. One area of difficulty is the ability to predict the fatigue life of the solder connections. To do this one must be able to accurately model the thermo-mechanical performance of the electronic package. As the solder ball size decreases, it becomes difficult to det...
متن کاملPattern of Residual Stress in Rail by FEM Analysis and Strain Gage Sectioning Technique
Final step of rail manufacturing is cold rolling straightening process and it hassignificant effects on mechanical properties, straightness, flatness and development of residualstresses. Measurement of residual stresses after straightening process is obligated by railmanufacturing standards. In the present investigation, an attempt has been made to evaluateresidual stresses after straightening ...
متن کامل