25.4: Active Structural Error Suppression in MEMS Vibrator y Gyroscopes
نویسندگان
چکیده
منابع مشابه
Closed-Loop Compensation of the Quadrature Error in MEMS Vibratory Gyroscopes
In this paper, a simple but effective method for compensation of the quadrature error in MEMS vibratory gyroscope is provided. The proposed method does not require any change in the sensor structure, or additional circuit in the feedback path. The mathematical relations of the proposed feedback readout system were analyzed and the proposed solution assures good rejection capabilities. Based on ...
متن کاملActive Structural Error Suppression in MEMS Vibratory Rate Integrating Gyroscopes
Due to restrictive tolerancing in microfabrication, structural imperfections that reduce performance of fabricated micro devices are typical. In microelectromechanical vibratory gyroscopes, feedback control is a common strategy in attempting to correct the imperfections. However, a purely feedback control can be insufficient for compensation of all the errors, requiring post processing in the f...
متن کاملApplication of MEMS Accelerometers and Gyroscopes in Fast Steering Mirror Control Systems
In a charge-coupled device (CCD)-based fast steering mirror (FSM) tracking control system, high control bandwidth is the most effective way to enhance the closed-loop performance. However, the control system usually suffers a great deal from mechanical resonances and time delays induced by the low sampling rate of CCDs. To meet the requirements of high precision and load restriction, fiber-opti...
متن کاملMEMS Inertial Sensors-Based Multi-Loop Control Enhanced by Disturbance Observation and Compensation for Fast Steering Mirror System
In this paper, an approach to improve the disturbance suppression performance of a fast steering mirror (FSM) tracking control system based on a charge-coupled device (CCD) and micro-electro-mechanical system (MEMS) inertial sensors is proposed. The disturbance observation and compensation (DOC) control method is recommended to enhance the classical multi-loop feedback control (MFC) for line-of...
متن کاملAchieving Long-term Bias Stability in High-q Inertial Mems by Temperature Self-sensing with a 0.5 Millicelcius Precision
We present long-term bias drift compensation in high-quality (Q) factor MEMS gyroscopes using real-time temperature selfsensing. The approach takes advantage of linear temperature dependence of the drive-mode resonant frequency for selfcompensation of temperature-induced sense-mode drifts. The approach was validated by a vacuum packaged silicon quadruple mass gyroscope, with signal-to-noise rat...
متن کامل