Vision-Based Motion Control of Pneumatic Group Actuators
نویسندگان
چکیده
A vision-based approach to the motion control of pneumatic group actuators is presented. Sensing of plate locations consisting of the pneumatic group actuator is essential to cope with the variation of elastic tubes of the actuator. Plate locations are measured by a vision system and the motion of the actuator is controlled using a roughly identified relationship between air pressure imposed on individual tubes and the plate locations. Proposed motion control is evaluated experimentally.
منابع مشابه
Development of a 3D Parallel Mechanism Robot Arm with Three Vertical-Axial Pneumatic Actuators Combined with a Stereo Vision System
This study aimed to develop a novel 3D parallel mechanism robot driven by three vertical-axial pneumatic actuators with a stereo vision system for path tracking control. The mechanical system and the control system are the primary novel parts for developing a 3D parallel mechanism robot. In the mechanical system, a 3D parallel mechanism robot contains three serial chains, a fixed base, a movabl...
متن کاملPrototyping Pneumatic Group Actuators Composed of Multiple Single-motion Elastic Tubes
In this article, we will develop pneumatic actuators composed of multiple elastic tubes. Elastic tubes with mechanical constraints have a capability of performing a single various motion while multiple motions cannot be performed. Actuators composed of single-motion tubes can realize multiple motions by controlling air pressure imposed on individual tubes. We will present the concept of group a...
متن کاملEnhanced Modelling and Performance in Braided Pneumatic Muscle Actuators
Pneumatic technology has been successfully applied for over two millennia. Even today, pneumatic cylinder based technology forms the keystone of many manufacturing processes where there is a need for simple, high-speed, low-cost, reliable motion. But when the system requires accurate control of position, velocity or acceleration profiles, these actuators form a far from satisfactory solution. B...
متن کاملHUmanoid Robotic Leg via pneumatic muscle actuators: implementation and control
In this article, a HUmanoid Robotic Leg (HURL) via the utilization of pneumatic muscle actuators (PMAs) is presented. PMAs are a pneumatic form of actuation possessing crucial attributes for the implementation of a design that mimics the motion characteristics of a human ankle. HURL acts as a feasibility study in the conceptual goal of developing a 10 degree-of-freedom (DoF) lower-limb humanoid...
متن کاملDesign and Validation of Exoskeleton Actuated by Soft Modules toward Neurorehabilitation—Vision-Based Control for Precise Reaching Motion of Upper Limb
We demonstrated the design, production, and functional properties of the Exoskeleton Actuated by the Soft Modules (EAsoftM). Integrating the 3D printed exoskeleton with passive joints to compensate gravity and with active joints to rotate the shoulder and elbow joints resulted in ultra-light system that could assist planar reaching motion by using the vision-based control law. The EAsoftM can s...
متن کامل