Effect of Tricalcium Aluminate on the Physicochemical Properties, Bioactivity, and Biocompatibility of Partially Stabilized Cements
نویسندگان
چکیده
BACKGROUND/PURPOSE Mineral Trioxide Aggregate (MTA) was widely used as a root-end filling material and for vital pulp therapy. A significant disadvantage to MTA is the prolonged setting time has limited the application in endodontic treatments. This study examined the physicochemical properties and biological performance of novel partially stabilized cements (PSCs) prepared to address some of the drawbacks of MTA, without causing any change in biological properties. PSC has a great potential as the vital pulp therapy material in dentistry. METHODS This study examined three experimental groups consisting of samples that were fabricated using sol-gel processes in C3S/C3A molar ratios of 9/1, 7/3, and 5/5 (denoted as PSC-91, PSC-73, and PSC-55, respectively). The comparison group consisted of MTA samples. The setting times, pH variation, compressive strength, morphology, and phase composition of hydration products and ex vivo bioactivity were evaluated. Moreover, biocompatibility was assessed by using lactate dehydrogenase to determine the cytotoxicity and a cell proliferation (WST-1) assay kit to determine cell viability. Mineralization was evaluated using Alizarin Red S staining. RESULTS Crystalline phases, which were determined using X-ray diffraction analysis, confirmed that the C3A contents of the material powder differed. The initial setting times of PSC-73 and PSC-55 ranged between 15 and 25 min; these values are significantly (p<0.05, ANOVA and post-hoc test) lower than those obtained for MTA (165 min) and PSC-91 (80.5 min). All of the PSCs exhibited ex vivo bioactivity when immersed in simulated body fluid. The biocompatibility results for all of the tested cements were as favorable as those of the negative control, except for PSC-55, which exhibited mild cytotoxicity. CONCLUSION PSC-91 is a favorable material for vital pulp therapy because it exhibits optimal compressive strength, a short setting time, and high biocompatibility and bioactivity.
منابع مشابه
Development and characterization of α-tricalcium phosphate/monocalcium aluminate composite bone cement
Calcium phosphate cements have received much attention in recent decades owing to their biocompatibility, in situ handling, and shaping abilities. However, their low initial mechanical strength is still a major limitation. On the other hand, calcium aluminate cements (CACs) set fast and have a high initial strength and good corrosion resistance in contact with body fluids, making them excellent...
متن کاملInhibitory Effect of Tricalcium Phosphate Sintered at Different Temperatures on Human Breast Cancer Cell Line MCF-7
Abstract Introduction: Achievement of new drugs with minimal side effects is a important goal in the cancer treatment due to irreversible side effects of conventional drugs. Tricalcium phosphates as natural bone components have unique characteristics including excellent biocompatibility, high biosorption and superior bioactivity. This research aimed at investigating the inhibitory effect of tr...
متن کاملInhibitory Effect of Tricalcium Phosphate Sintered at Different Temperatures on Human Breast Cancer Cell Line MCF-7
Abstract Introduction: Achievement of new drugs with minimal side effects is a important goal in the cancer treatment due to irreversible side effects of conventional drugs. Tricalcium phosphates as natural bone components have unique characteristics including excellent biocompatibility, high biosorption and superior bioactivity. This research aimed at investigating the inhibitory effect of tr...
متن کاملGelcasting as a Novel Processing Route to Fabricate Partially Stabilized Zirconia Ceramic Bodies
Bioinert ceramics, like alumina and zirconia are used mainly for replacements of bones, hip joints and for dental implants. Partially stabilized zirconia ceramics (PSZ or TZP with 3 mol.% or 5 wt.% Y2O3), appear as perspective bioinert ceramics because of their high strength and corrosion resistance. In order to fabricate complex shapes, it is essential to use a near ...
متن کاملInvestigation of process factors in the synthesis of Ca7ZrAl6O18 cement by solid state method in order to eliminate undesirable secondary phases
One of the widely used cements for filling teeth and bones can be calcium zirconium aluminate cement Ca7ZrAl6O18, which of course can also be used as a refractory. The behavior and properties of this cement are more similar to tricalcium aluminate C3A cement. In this study, C7A3Z cement was synthesized by using commercial calcium carbonate, alumina and zirconia powders and after grinding for 4-...
متن کامل