Fabrication and design of micro-optical interconnect systems with fanout
نویسنده
چکیده
منابع مشابه
Fabrication of micro-optical switch by post-CMOS micromachining process
This work presents the micro-machined 2-D switch array for use on free-space optical interconnect platform integrated with a digital 1×8 de-multiplexer control circuit together. Moreover, this device employs electrostatic actuation for light beam directions control. The CMOS-MEMS array-based optical platform contains 10×10 circular micromirrors switching spots, the diameter of each mirror is ab...
متن کاملFabrication of Free-space MOEM Component by CMOS Process
This work presents the micro-mirror switch array for use on free-space optical interconnect platform which integrated with a digital 1×8 de-multiplexer on-chip control circuit together. The device employs electrostatic actuation for light beam directions control. The diameter of each mirror is about 50 μm and the overall chip size is around 1.8 by 1.8 mm. The professional simulation software wa...
متن کاملFabrication and Characterization of the Fiber Optical Taper for a Surface Plasmon Resonance Sensor
For a fiber optical surface plasmon resonance (SPR) sensor a short part of its cladding should be removed to coat a thin layer of a metal. Usually this is problematic when an optical fiber with small core diameter is used. In this paper, a new method using µliter droplet of the HF acid for short fiber optical taper fabrication is reported. Using this method in a multi-mode optical fiber w...
متن کاملIntegrated Mems Technologies for Adaptive Optics Chair ________________________________________ Date ________________ ________________________________________ Date ________________ Integrated Mems Technologies for Adaptive Optics
Integrated MEMS Technologies for Adaptive Optics by Blake Ching-Yu Lin Doctor of Philosophy in Engineering Electrical Engineering and Computer Sciences University of California, Berkeley Professor Richard S. Muller, Chair Image resolutions of modern optical systems are many times limited by wavefront aberrations due to turbulence in the optical media. Adaptive Optics (AO) is a technology that u...
متن کاملASIC design protection against reverse engineering during the fabrication process using automatic netlist obfuscation design flow
Fab-less business model in semiconductor industry has led to serious concerns about trustworthy hardware. In untrusted foundries and manufacturing companies, submitted layout may be analyzed and reverse engineered to steal the information of a design or insert malicious Trojans. Understanding the netlist topology is the ultimate goal of the reverse engineering process. In this paper, we propose...
متن کامل