Kautz-Volterra modelling of an analogue-to-digital converter using a stepped three-tone excitation
نویسندگان
چکیده
In many test and measurement applications, the analogue-to-digital converter (ADC) is the limiting component. Using post-correction methods can improve the performance of the component as well as the over all measurement system. In this paper an ADC is characterised by a Kautz-Volterra (KV) model, which utilises a model-based post-correction of the ADC with general properties and a reasonable number of parameters. Results that are based on measurements on a high-speed 12-bit ADC, shows good results for a third order model.
منابع مشابه
Modeling Analog to Digital Converters at Radio Frequency
This work considers behavior modeling of analog to digital converters with applications in the radio frequency range, including the field of telecommunication as well as test and measurement instrumentation, where the conversion from analog to digital signals often is a bottleneck in performance. The models are intended to postprocess output data from the converter and thereby improve the perfo...
متن کاملRadio Frequency Power Amplifiers Behavioral Modeling, Parameter-Reduction, and Digital Predistortion
This work considers behavioral modeling, parameter-reduction, and digital predistortion of radio frequency power amplifiers. Due to the use of modern digital modulation methods, contemporary power amplifiers are frequently subjected to signals characterized by considerable bandwidths and fast changing envelopes. As a result, traditional quasi-memoryless amplitude-to-amplitude (AM/AM) and amplit...
متن کاملOptimal fast digital error correction method of pipelined analog to digital converter with DLMS algorithm
In this paper, convergence rate of digital error correction algorithm in correction of capacitor mismatch error and finite and nonlinear gain of Op-Amp has increased significantly by the use of DLMS, an evolutionary search algorithm. To this end, a 16-bit pipelined analog to digital converter was modeled. The obtained digital model is a FIR filter with 16 adjustable weights. To adjust weights o...
متن کاملPerformance Scrutiny of Two Control Schemes Based on DSM and HB in Active Power Filter
This paper presents a comparative analysis between two current control strategies, constant source power and generalized Fryze current, used in Active Power Filter (APF) applications having three different modulation methods. The Hysteresis Band (HB) and first-order Delta-Sigma Modulation (DSM) as well as the second-order DSM is applied. The power section of the active power filter is viewed as...
متن کاملModelling and simulation of wireless sensor system for health monitoring using HDL and Simulinkw mixed environment
The aim of this study is to model and design an efficient wireless system that is easy to integrate with other technologies or infrastructures at a low cost. The system would read analogue information recorded by a biomedical sensor in a transmitting unit attached to the patient. The recorded data are converted digitally using analogue-to-digital converter and sent to frequencyshift keying (FSK...
متن کامل