Flame-Retardant Polyamide 6/Carbon Nanotube Nanofibers: Processing and Characterization

نویسندگان

  • Xiaoli Yin
  • Mourad Krifa
چکیده

Polyamide 6 (PA6) was melt-blended with an intumescent flame retardant (FR), multi-wall carbon nanotubes (MWNTs), and nanoclay particles to produce multi-component FR-PA6 nanocomposites. FR-PA6 nanofibers were processed from varied nanocomposite formulations via electrospinning. Electrospinnability, morphology, along with combustion and thermal properties of the nanofibers were investigated. Both the bulk-form nanocomposites and the electrospun nanofiber membranes exhibited significantly improved combustion properties, including both Heat Release Rate and Total Heat Release. On the other hand, thermal stability appeared compromised. With proper FR additive concentrations, synergism between MWNTs and nanoclay was observed.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Preparation of Organo Nanoclay Incorporated Polyamide/ Melamine Cyanurate/Nanoclay Composites and Study on Thermal and Mechanical Behaviours

This study focuses on achieving high stiffness/strength and good FR characteristic of nylon 66/MCA/NC nanocomposites, prepared via melt compounding by twin screw extruder. A synergistic effect of flame retardant systems based on melamine cyanurate and zinc borate on the flammability and mechanical behaviours of crysnanoclay reinforced nylon 66 nanocomposites have been reported. Mechanical test ...

متن کامل

Study of fire retardant behavior of carbon nanotube membranes and carbon nanofiber paper in carbon fiber reinforced epoxy composites

Single-walled carbon nanotube (SWCNT) and multi-walled carbon nanotube (MWCNT) membranes (buckypaper) and carbon nanofiber (CNF) paper were incorporated onto the surface of epoxy carbon fiber composites, as proposed fire shields. Their flammability behaviors were investigated by a cone calorimeter. SWCNT buckypaper and CNF paper did not show notable improvement on fire retardancy. However, MWCN...

متن کامل

Layered double hydroxide-oxidized carbon nanotube hybrids as highly efficient flame retardant nanofillers for polypropylene

Aqueous miscible organic layered double hydroxides (AMO-LDHs) can act as organophilic inorganic flame retardant nanofillers for unmodified non-polar polymers. In this contribution, AMO [Mg3Al(OH)8](CO3)0.5·yH2O LDH-oxidized carbon nanotube (AMO-LDH-OCNT) hybrids are shown to perform better than the equivalent pure AMO-LDH. A synergistic effect between the AMO-LDH and OCNT was observed; this end...

متن کامل

Fabrication of Cellulose Nanofiber/AlOOH Aerogel for Flame Retardant and Thermal Insulation

Cellulose nanofiber/AlOOH aerogel for flame retardant and thermal insulation was successfully prepared through a hydrothermal method. Their flame retardant and thermal insulation properties were investigated. The morphology image of the cellulose nanofiber/AlOOH exhibited spherical AlOOH with an average diameter of 0.5 μm that was wrapped by cellulose nanofiber or adhered to them. Cellulose nan...

متن کامل

Lignin-Modified Carbon Nanotube/Graphene Hybrid Coating as Efficient Flame Retardant

To reduce fire hazards and expand high-value applications of lignocellulosic materials, thin films comprising graphene nanoplatelets (GnPs) and multi-wall carbon nanotubes (CNTs) pre-adsorbed with alkali lignin were deposited by a Meyer rod process. Lightweight and highly flexible papers with increased gas impermeability were obtained by coating a protective layer of carbon nanomaterials in a r...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015