An Energy-Based Model of Longitudinal Splitting in Unidirectional Fiber-Reinforced Composites
نویسندگان
چکیده
Unidirectional fiber-reinforced composites are often observed to fail in a longitudinal splitting mode in the fiber direction under far-field compressive loading with weak lateral confinement. An energy-based model is developed based on the principle of minimum potential energy and the evaluation of effective properties to obtain an analytical approximation to the critical stress for longitudinal splitting. The analytic estimate for the compressive strength is used to illustrate its dependence on material properties, surface energy, fiber volume fraction, fiber diameter, and lateral confining pressure. The predictions of the model show good agreement with available experimental data. @S0021-8936~00!02003-1#
منابع مشابه
Comparison of Two Computational Microstructure Models for Predicting Effective Transverse Elastic Properties of Unidirectional Fiber Reinforced Composites
Characterization of properties of composites has attracted a great deal of attention towards exploring their applications in engineering. The purpose of this work is to study the difference of two computational microstructure models which are widely used for determining effective transverse elastic properties of unidirectional fiber reinforced composites. The first model based on the classic me...
متن کاملCompressive response and failure of fiber reinforced unidirectional composites
The compressive response of polymer matrix fiber reinforced unidirectional composites (PMC’s) is investigated via a combination of experiment and analysis. The study accounts for the nonlinear constitutive response of the polymer matrix material and examines the effect of fiber geometric imperfections, fiber mechanical properties and fiber volume fraction on the measured compressive strength an...
متن کاملFractographic Analysis of Tensile Failures of Aerospace Grade Composites
This paper describes fractographic features observed in aerospace composites failed under tensile loads. Unidirectional Carbon Fibre Reinforced Plastic (UD CFRP) and Unidirectional Glass Fibre Reinforced Plastic (UD GFRP) composite specimens were fabricated and tested in tension. The morphology of fractured surfaces was studied at various locations to identify failure mechanism and characterist...
متن کاملCompressive Splitting Failure in Fiber Reinforced Unidirectional Composites Using Modified Shear Lag Theory
Compressive failure by splitting is studied herein via an analytical model. The use of a shear lag model to determine the stress state at the crack tip and the modeling of the region away from the crack tip by the 3D elasticity equations leads to a simple analytical expression is used to determine the compliance changes for both unsteady crack growth as well as steady state crack growth under c...
متن کاملInvestigation of Tensile Characteristics of an Epoxy Matrix Com-posite with Uni-Directional and Hybrid Tissue Natural Hemp Fibers
Using natural hemp fibers to reinforce the tensile characteristics of polymer matrix composites is investigated in this article. The fibers were applied to the epoxy matrix in unidirectional and hybrid tissue forms. After preparation of standard tensile stress test specimens via manual layup, the standard tensile test was done. Young’s modulus, ultimate tensile stress, and the amount of absorb...
متن کامل