Beam quality and noise properties of coherently combined ytterbium doped single frequency fiber amplifiers.

نویسندگان

  • Henrik Tünnermann
  • Jan Hendrik Pöld
  • Jörg Neumann
  • Dietmar Kracht
  • Benno Willke
  • Peter Wessels
چکیده

Collinear coherent combination of multiple single frequency fiber amplifiers is a promising approach to realize the high power laser sources required for 3rd generation gravitational wave detectors (GWD), as long as the stringent requirements on the beam quality and noise properties can be met. Here, we report the beam quality and noise properties of two coherently combined 10 W single frequency amplifiers with respect to the requirements of GWD. The combining efficiency was larger than 95% with 97% of the combined beam in the fundamental spatial mode. There was no significant noise increase compared to the fluctuations of the single amplifier.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

All-fiber coherent beam combining with phase stabilization via differential pump power control.

Coherent beam combining enables power scaling beyond the limits of single amplifiers. Therefore, improving the performance and simplicity of coherent combination techniques is of great interest for many high power applications. Here, we show all-fiber coherent beam combining of two ytterbium doped amplifiers with and without a dedicated phase actuator and a total output power up to 25 W. Instea...

متن کامل

Coherently combined master oscillator fiber power amplifiers for Advanced Virgo.

Stable low-noise high-power lasers are indispensable in advancing the strain sensitivity of interferometric gravitational wave detectors. Advanced LIGO and Advanced Virgo are currently under commissioning and require about 200 W of single-frequency laser power, while the future detector design may require up to the order of 500 W. In this Letter, we present the design and, to the best of our kn...

متن کامل

Thermo-optical effects in high-power ytterbium-doped fiber amplifiers.

We investigate the effect of temperature gradients in high-power Yb-doped fiber amplifiers by a numerical beam propagation model, which takes thermal effects into account in a self-consistent way. The thermally induced change in the refractive index of the fiber leads to a thermal lensing effect, which decreases the effective mode area. Furthermore, it is demonstrated that the thermal lensing e...

متن کامل

Beam combining of ytterbium fiber amplifiers (Invited)

Fiber lasers are well suited to scaling to high average power using beam-combining techniques. For coherent combining, optical phase-noise characterization of a ytterbium fiber amplifier is required to perform a critical evaluation of various approaches to coherent combining. For wavelength beam combining, we demonstrate good beam quality from the combination of three fiber amplifiers, and we d...

متن کامل

Erbium Doped Fiber Amplifiers: State Of Art

The field of optics has a drastic impact in the field of electronics and communication. With the rising need for higher data transfer rate, optical advancements have served this purpose. Optical amplifiers play a crucial role in the amplification of signal at regular intervals to avoid loss of data. Erbium doped fiber amplifiers (Erbium Doped Fiber Amplifier) carry out the amplification by stim...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Optics express

دوره 19 20  شماره 

صفحات  -

تاریخ انتشار 2011