Pressurized Structure Technology for Uavs
نویسندگان
چکیده
There is a critical need to improve the performance and utility of unmanned aerial vehicles (UAVs). Several areas of UAV performance need to be improved for the next generation of UAVS to be used successfully in expanded future combat roles. For example current time aloft is only on the order of an hour or two for electric-powered UAVs. The current generation of UAVs lacks vertical takeoff and landing (VTOL) capability and precision slow-speed maneuverability required for urban navigation and targeting. In addition, the UAVs are not capable of stealth, and are easily spotted and/or heard. These deficiencies are related mostly to the airframe and method of propulsion. Most fielded UAVs are currently based on fixed-wing or rotor-craft airframes and thus are constrained to their flight characteristics. UAV propulsion using ducted fans may also be fielded. In general, these vehicles require the motors, electrical or internal combustion to be running at high speed to keep the UAV aloft. This requires a substantial amount of energy and generates noise at excessive levels. One way to address the deficiencies of the UAVs just listed is to employ lighter-than-air or pressurized structure-based (PSB) technology. Basically, the UAV will be built such that a considerable percentage of its weight is supported by or constructed from inflatable structures containing air or helium. PSB technology will reduce the amount of energy required to keep the UAV aloft thus allowing the use of smaller, slower, and quieter motors. An airframe near neutral buoyancy will allow much slower flight speeds and increased maneuverability while expending little power. PSB airframes used in conjunction with technologies such as solar cells may be able to stay aloft for extended periods of time.
منابع مشابه
A New Single-Display Intelligent Adaptive Interface for Controlling a Group of UAVs
The increasing use of unmanned aerial vehicles (UAVs) or drones in different civil and military operations has attracted attention of many researchers and science communities. One of the most notable challenges in this field is supervising and controlling a group or a team of UAVs by a single user. Thereupon, we proposed a new intelligent adaptive interface (IAI) to overcome to this challenge. ...
متن کاملAirborne Seeker Application in Three Dimensional Formation Flight of UAVs
This paper deals with the leader-follower formation control problem while communication constraint in data transmitting is considered. From a practical point of view, we study the case in which unmanned vehicles are subject to the limited sensing, and communication is of a particular interest. A three-dimensional formation flight of multi-unmanned aerial vehicles with leader-follower configurat...
متن کاملThermal-Hydraulics analysis of pressurized water reactor core by using single heated channel model
Thermal hydraulics of nuclear reactor as a basis of reactor safety has a very important role in reactor design and control. The thermal-hydraulic analysis provides input data to the reactor-physics analysis, whereas the latter gives information about the distribution of heat sources, which is needed to perform the thermal-hydraulic analysis. In this study single heated channel model as a very f...
متن کاملWeight Optimum Design of Pressurized and Axially Loaded Stiffened Conical Shells to Prevent Stress and Buckling Failures
An optimal design of internal pressurized stiffened conical shell is investigated using the genetic algorithm (GA) to minimize the structural weight and to prevent various types of stress and buckling failures. Axial compressive load is applied to the shell. Five stress and buckling failures as constraints are taken into account. Using the discrete elements method as well as the energy method, ...
متن کامل