Experimental Study of Fluidized Bed Agglomeration of Acerola Powder
نویسنده
چکیده
The aim of this work was to study the main effects of acerola powder on fluidized bed agglomeration. A 2 fractional factoring design was used to evaluate the main operating conditions (fluidizing air temperature, fluidizing air velocity, atomizing air flow and height of nozzle in the bed). The mechanical and physicochemical product changes were determined by analysis of particle diameter, moisture content, wetting time and bed porosity. The particle enlargement by agglomeration occurred when the relative humidity in the bed increased and, thus, the moisture of the product increased. However, the excessive increase in relative humidity resulted in a decrease in yield, caused by caking and product incrustation. The consolidation of small granules resulted in an increase in the instant properties, decreasing the wetting time and increasing the solubility in a short period of agitation.
منابع مشابه
Milk powder agglomerate growth and properties in fluidized bed agglomeration
Fluidized bed agglomeration is used to produce large and porous dry agglomerates with improved instant properties. Water (or binder solution) is sprayed in the fluidized bed of particles to render their surface sticky. The agglomerate growth results from the repetition of different steps (wetting of the particle surface, particles collision and bridging, and drying) and depends on the processin...
متن کاملA Numerical Study on Agglomeration in High Temperature Fluidized beds
Soft-sphere discrete element method (DEM) and Navier-Stokes equations were coupled with equations of energy for gas and solids to investigate the process of agglomeration in fluidized bed of polyethylene particles at high temperature. The Newton’s second law of motion was adapted for translational and rotational motion of particles and agglomerates. The cohesive force for polyethylene particles...
متن کاملFluidized-Bed Combustion of Biomass with Elevated Alkali Content: A Comparative Study between Two Alternative Bed Materials
Palm kernel shell is an important bioenergy resource in Thailand. However, due to elevated alkali content in biomass ash, this oil palm residue shows high tendency to bed agglomeration in a fluidized-bed combustion system using conventional bed material (silica sand). In this study, palm kernel shell was burned in the conical fluidized-bed combustor (FBC) using alumina and dolomite as alternati...
متن کاملExperimental Study of Coating in a Bottom Sprayed Fluidized Bed
Several investigations have been devoted towards understanding the coating process in fluidized beds. Most of these studies focused on spraying liquid droplets over the bed. However, due to the complexity of these systems, more investigations are still required to quantify the effect of operating conditions on the coating criteria. The present work aims at fundamentally understanding and pr...
متن کاملAdvanced Process Control for Fluidized Bed Agglomeration
Fluidized bed agglomeration is an advanced technology to produce spherical coarse-grained material of uniform size ready for sale without any need for post-treatment. This study discusses the possibilities and appropriateness of an intelligent control method such as a fuzzy logic controller in simulating and controlling fluidized bed agglomeration performance. Modeling and simulation was perfor...
متن کامل