Strip injection for carbon ion synchrotrons.
نویسندگان
چکیده
Requirements and effects of strip injection of C(4+) at 6 MeV/u into carbon ion synchrotrons are studied. The setup is composed of three chicane dipoles, one Lambertson septum, and one carbon stripping foil at a thickness of 60 microg/cm(2). The required length of the injection section is about 4.1 m. The emittance growth due to multiple Coulomb scatterings is studied.
منابع مشابه
The Synchrotron of the Dedicated Ion Beam Facility for Cancer Therapy, Proposed for the Clinic in Heidelberg
For the clinic in Heidelberg/Germany an accelerator facility is proposed for the treatment of cancer tumours with light ions using the ‘intensity controlled rasterscan‘ method [1]. The layout of the synchrotron is presented, that is designed to accelerate carbon ions from an injection energy of 7 MeV/u up to a maximal extraction energy of 430 MeV/u, corresponding to a magnetic rigidity of 6.6 T...
متن کاملTemperature Measurements of Carbon Stripper Foil by Pulesd 650kev H- Ion Beam*
Thick carbon foils (>300 mg/cm)has been used for stripping of H ion beam into protons at the injection stage of the 3GeV Rapid Cycling Synchrotron (3GeV-RCS) in J-PARC. The carbon stripper foils with high durability at high temperature >1800 oK are strongly required. A new irradiation system for foils is in progress using the KEK 650keV Cockcroft-Walton accelerator which can simulate the high-e...
متن کاملRealization of Thick Hybrid Type Carbon Stripper Foils with High Durability at 1800k for Rcs of J-parc
The Japan-Proton Accelerator Research Complexes (J-PARC) requires thick carbon stripper foils (250-500 μg/cm) to strip electrons from the H beam supplied by the linac before injection into the RCS (Rapid Cycling Synchrotron). The 200 MeV H beam from the linac has a pulse length of 0.5 ms with a repetition rate of 25 Hz and an average beam current of 335 μA. For this high-energy and high-intensi...
متن کاملStudy and optimization of the necessary conditions for the sensitive determination of the lead ion by a modified carbon paste electrode in environmental water samples
Rapid and facile preparation of the cheap modified electrode materials is an important parameter in development of the efficient electrochemical sensor for industrial scale production and mass-market usage. In the present work, the carbon paste electrode modified with multi-walled carbon nanotubes (MWCNTs) was prepared for sensitive determination of lead (Pb) ion in the presence of bismuth (Bi)...
متن کاملStudy and optimization of the necessary conditions for the sensitive determination of the lead ion by a modified carbon paste electrode in environmental water samples
Rapid and facile preparation of the cheap modified electrode materials is an important parameter in development of the efficient electrochemical sensor for industrial scale production and mass-market usage. In the present work, the carbon paste electrode modified with multi-walled carbon nanotubes (MWCNTs) was prepared for sensitive determination of lead (Pb) ion in the presence of bismuth (Bi)...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The Review of scientific instruments
دوره 78 9 شماره
صفحات -
تاریخ انتشار 2007