Reliability of Networked Control System Using the Network Reconfiguration Strategy
نویسندگان
چکیده
This paper presents results of modelling and analysis of Network Control Systems (NCS) using the reconfiguration strategies in case of individual networks faults. In general the NCS as all systems follows its mission which should be accomplished with guarantee. The system mission can be disturbed or interrupted by failures which occur with some probability. A primary requirement in order to benefit from network reconfigurations is to prepare some reconfiguration mechanisms which are executed just after the network failure, when the communication of some of the components has to be retransmitted through other non-failed networks. The implementation of a suitable reconfiguration strategy allows significant improvement of the dependability attributes and parameters.
منابع مشابه
Raising Power Quality and Improving Reliability by Distribution Network Reconfiguration in the Presence of Renewable Energy Sources
In this paper, reconfiguration problem of distribution network has been investigated toimprove reliability and reduce power loss by placement of renewable energy sources; i.e. solarcell and wind turbine. For this, four reliability indices are considered in objective function;which are as follows: System Average Interruption Frequency Index (SAIFI), System AverageInterruption Duration Index (SAI...
متن کاملReconfiguration of distribution systems to improve reliability and reduce power losses using Imperialist Competitive Algorithm
Distribution systems can be operated in multiple configurations since they are possible combinations of radial and loop feeders. Each configuration leads to its own power losses and reliability level of supplying electric energy to customers. In order to obtain the optimal configuration of power networks, their reconfiguration is formulated as a complex optimization problem with different objec...
متن کاملModelling and Compensation of uncertain time-delays in networked control systems with plant uncertainty using an Improved RMPC Method
Control systems with digital communication between sensors, controllers and actuators are called as Networked Control Systems (NCSs). In general, NCSs encounter with some problems such as packet dropouts and network induced delays. When plant uncertainty is added to the aforementioned problems, the design of the robust controller that is able to guarantee the stability, becomes more complex. In...
متن کاملReconfigurable Networked Fuzzy Takagi Sugeno Control for Magnetic Levitation Case Study
Nowadays dynamic behavior performed by a computer network system can be modeled from the perspective of a control system. One strategy to be followed it is the real-time modeling of the magnetic levitation system. From this way of representation of a computer network system, next stage is how control approach can be affected and modified. In that respect, this paper proposes a control reconfigu...
متن کاملOptimal Reconfiguration of Distribution Network for Power Loss Reduction and Reliability Improvement Using Bat Algorithm
In power systems, reconfiguration is one of the simplest and most low-cost methods to reach many goals such as self-healing, reliability improvement, and power loss reduction, without including any additional components. Regarding the expansion of distribution networks, communications become more complicate and the number of parameters increases, which makes the reconfiguration problem infeasib...
متن کامل