Stiffness Analysis of a Planar 3-RPS Parallel Manipulator
نویسندگان
چکیده
This paper studied the stiffness model and characteristics of a planar 3-RPS PM with 3-DOF. The 6 × 6 form stiffness matrix of the planar 3-RPS PM is derived with both active and constrained wrenches considered. To characteristic the stiffness of the planer 3-RPS PM, two decomposition methods including the eigenscrew decomposition and the principle axes decomposition are applied to the stiffness matrix. The stiffness matrix decomposition provides a physical interpretation and allows the identification of the compliant axes of the planar 3-RPS PM.
منابع مشابه
3-RPS Parallel Manipulator Dynamical Modelling and Control Based on SMC and FL Methods
In this paper, a dynamical model-based SMC (Sliding Mode Control) is proposed fortrajectory tracking of a 3-RPS (Revolute, Prismatic, Spherical) parallel manipulator. With ignoring smallinertial effects of all legs and joints compared with those of the end-effector of 3-RPS, the dynamical model ofthe manipulator is developed based on Lagrange method. By removing the unknown Lagrange multipliers...
متن کاملChanging Assembly Modes without Passing Parallel Singularities in Non-Cuspidal 3-RPR Planar Parallel Robots
This paper demonstrates that any general 3-DOF three-legged planar parallel robot with extensible legs can change assembly modes without passing through parallel singularities (configurations where the mobile platform loses its stiffness). While the results are purely theoretical, this paper questions the very definition of parallel singularities.
متن کاملChanging Assembly Modes without Passing Parallel Singularities in Non-Cuspidal 3-R\underline{P}R Planar Parallel Robots
This paper demonstrates that any general 3-DOF three-legged planar parallel robot with extensible legs can change assembly modes without passing through parallel singularities (configurations where the mobile platform loses its stiffness). While the results are purely theoretical, this paper questions the very definition of parallel singularities.
متن کاملThe Kinematic design of a 3-dof Hybrid Manipulator
This paper focuses on the kinematic properties of a new three-degree-of-freedom hybrid manipulator. This manipulator is obtained by adding in series to a five-bar planar mechanism (similar to the one studied by Bajpai and Roth [1]) a third revolute passing through the line of centers of the two actuated revolute joints of the above linkage (Figures 2 & 3). The resulting architecture is hybrid i...
متن کاملStiffness Synthesis of a Variable Geometry Six-Degrees-of-Freedom Double Planar Parallel Robot
In this paper, we address the stiffness synthesis problem of variable geometry double planar parallel robots. For a desired stiffness matrix, the free geometrical variables are calculated as a solution of a corresponding polynomial system. Since in practice the set of free geometrical variables might be deficient, the suggested solution addresses also the case where not all stiffness matrix ele...
متن کامل