Advanced Aerodynamic Control Effectors
نویسنده
چکیده
A 1990 research program that focused on the development of advanced aerodynamic control effectors (AACE) for military aircraft has been reviewed and summarized. Data are presented for advanced planform, flow control, and surface contouring technologies. The data show significant increases in lift, reductions in drag, and increased control power, compared to typical aerodynamic designs. The results presented also highlighted the importance of planform selection in the design of a control effector suite. Planform data showed that dramatic increases in lift (> 25%) can be achieved with multiple wings and a sawtooth forebody. Passive porosity and micro drag generator control effector data showed control power levels exceeding that available from typical effectors (moving surfaces). Application of an advanced planform to a tailless concept showed benefits of similar magnitude as those observed in the generic studies.
منابع مشابه
Optimal Setpoint Controller for a Generic X-29a Aircraft with Forebody Vortex Nozzles
This paper presents the design, synthesis, and performance of an optimal setpoint high angle-of-attack lateralldirectional controller for the X-29A aircraft equipped with forebody vortex flow control nozzles. The closed-loop control law is full state feedback, and is synthesized using a linear time-invariant generic model of the X-29A. Results demonstrate that by proper selection of the weighti...
متن کاملPost-Stall Aerodynamic Modeling and Gain-Scheduled Control Design
A multidisciplinary research effort that combines aerodynamic modeling and gain-scheduled control design for aircraft flight at post-stall conditions is described. The aerodynamic modeling uses a decambering approach for rapid prediction of post-stall aerodynamic characteristics of multiple-wing configurations using known section data. The approach is successful in bringing to light multiple so...
متن کاملSmart morphable surfaces for aerodynamic drag control.
Smart Morphable Surfaces enable switchable and tunable aerodynamic drag reduction of bluff bodies. Their topography, resembling the morphology of golf balls, can be custom-generated through a wrinkling instability on a curved surface. Pneumatic actuation of these patterns results in the control of the drag coefficient of spherical samples by up to a factor of two, over a range of flow conditions.
متن کاملAdaptive Quaternion Attitude Control of Aerodynamic Flight Control Vehicles
Conventional quaternion based methods have been extensively employed for spacecraft attitude control where the aerodynamic forces can be neglected. In the presence of aerodynamic forces, the flight attitude control is more complicated due to aerodynamic moments and inertia uncertainties. In this paper, a robust nero-adaptive quat...
متن کامل+ Full - Envelope Aerodynamic Modeling of the Harrier Aircraft
The status of an ongoing project to identify a full-envelope model of the YAV-8B Harrier using flight-test and parameter identification techniques is described. As part of the research in advanced control and display concepts for V/STOL aircraft, a full-envelope aerodynamic model of the YAV-8B will be identified. Mathematical model structures and parameter identification methods that are being ...
متن کامل