Influence of N, N-dimethylacetamid on the Thermal and Mechanical Properties of Polymer-filled Wood
نویسندگان
چکیده
Mercerized wood species were impregnated with N, N-dimethylacetamid. The FT-IR showed enhanced absorption at 1419 cm(-C-/CH3), and the 1267 cm (-N-/ CH3) stretching band confirmed the polymerization reaction. Differential scanning calorimetric analysis indicated that the decomposition temperature of polymer-filled wood gives a higher thermal stability compared to the raw material. Polymer-filled wood yielded higher MOE and MOR compared to the untreated wood. The Young’s modulus of Xylopia Spp Artocarpus Rigidus and Eugenia Spp were significantly different between raw wood and WPC. The increase in the stiffness and the thermal stability of the composites increased due to the crystallinity of polymer-filled wood as indicated by XRD analysis.
منابع مشابه
Effect of carbon black and fly ash co-fillers content on mechanical and thermal behaviors of styrene butadiene rubber compounds
Fly ash (FA) is produced as a waste byproduct during the burning process of coal in thermal power plants whose cost is primarily associated to cleaning and transportation. It possesses mechanical properties on account of its constituents like silica and alumina. The use of FA as filler in styrene butadiene rubber (SBR) was of researchers’ interest to reinforce and/or to reduce product cost. In ...
متن کاملInvestigation of Natural Convection in a Vertical Cavity Filled with a Anisotropic Porous Media
In present paper, a numerical analysis for a rectangular cavity filled with a anisotropic porous media has been studied. It is assumed that the horizontal walls are adiabatic and impermeable, while the side walls of the cavity are maintained at constant temperatures and concentrations. The buoyancy force that induced the fluid motion are assumed to be cooperative. In the two extreme cases o...
متن کاملComparison of Compressive Properties Between Va-cuum Infusion and Hand Lay-Up Method Toward Bal-sa Core Sandwich Composites
The aim of this work is to evaluate the influence of fabrication methods on the com-pressive properties of sandwich composites using both experimental work and numerical simulations. Two types of sandwich composites with E-glass/Kevlar/polyester resin facings and End-grain balsa wood as core have been produced by vacuum infusion processing (VIP) and hand-lay up (HL) method. Compression tests on...
متن کاملAb initio study of the structural, mechanical and thermal properties of (B, Al and Ga)-N nanotubes (4,0)
In this work we use density functional theory based on the ultra-soft pseudo-potential to calculate thestructural, mechanical and thermal properties of narrow single walled BN, AlN and GaN nanotubes.The electron-electron interactions were expressed within the local density approximation (LDA). Wehave also obtained the Phonon dispersion and elastic constants of these nanotubes using the densityf...
متن کاملStudying the Mechanical and Thermal Properties of Polymer Nanocomposites Reinforced with Montmorillonite Nanoparticles Using Micromechanics Method
In this study, the mechanical and thermal behavior of the nano-reinforced polymer composite reinforced by Montmorillonite (MMT) nanoparticles is investigated. Due to low cost of computations, the 3D representative volume elements (RVE) method is utilized using ABAQUS finite element commercial software. Low density poly ethylene (LDPE) and MMT are used as matrix and nanoparticle material, respec...
متن کامل