Cost Analysis of K-Out of-n Repairable System with Dependent Failure and Stand by Support Using Kolmogorov's Forward Equations Method
نویسنده
چکیده
Problem statement: Many authors have studied k-out of-n repairable system with dependent failure and standby support. The question was raised whether the repair and standby units support increase the reliability of the system. Determine the efficiency of repair and standby support on the reliability of the system. Approach: In this study the statistical analysis of k-out of-n repairable system with dependent failure and standby support were discussed. Several reliability characteristics are obtained by using Kolmogorov’s forward equations method. After the model is developed a particular case study is discussed to validate the theoretical results, a numerical computation are derived. Tables and graphs have been also given in the end. Results: The results indicated that the system with repair and standby support is better than the system without repair and standby support. Conclusion: These results indicated that the system with repair of its failed parts and standby redundancy facility increased the reliability of the system.
منابع مشابه
Reliability Analysis of Redundant Repairable System with Degraded Failure
This investigation deals with the transient analysis of the machine repair system consisting of M-operating units operating under the care of single repairman. To improve the system reliability/availability, Y warm standby and S cold standby units are provided to replace the failed units. In case when all spares are being used, the failure of units occurs in degraded fashion. In such situation ...
متن کاملSolving Redundancy Allocation Problem with Repairable Components Using Genetic Algorithm and Simulation Method
Reliability optimization problem has a wide application in engineering area. One of the most important problems in reliability is redundancy allocation problem (RAP). In this research, we worked on a RAP with repairable components and k-out-of-n sub-systems structure. The objective function was to maximize system reliability under cost and weight constraints. The aim was determining optimal com...
متن کاملAvailability Optimization of a Series Repairable System with Multiple k-out-of-n Subsystems
An availability model is developed to optimize the availability of a series repairable system with multiple k-out-of-n subsystems in this paper. There are two types of decision variables that determine the system designer’s decision to allocate the number of repairmen and to allocate the number of redundant components in each subsystem in the presence of weight, volume and cost constraint...
متن کاملMTBF evaluation for 2-out-of-3 redundant repairable systems with common cause and cascade failures considering fuzzy rates for failures and repair: a case study of a centrifugal water pumping system
In many cases, redundant systems are beset by both independent and dependent failures. Ignoring dependent variables in MTBF evaluation of redundant systems hastens the occurrence of failure, causing it to take place before the expected time, hence decreasing safety and creating irreversible damages. Common cause failure (CCF) and cascading failure are two varieties of dependent failures, both l...
متن کاملAn efficient approach for availability analysis through fuzzy differential equations and particle swarm optimization
This article formulates a new technique for behavior analysis of systems through fuzzy Kolmogorov's differential equations and Particle Swarm Optimization. For handling the uncertainty in data, differential equations have been formulated by Markov modeling of system in fuzzy environment. First solution of these derived fuzzy Kolmogorov's differential equations has been found by Runge-Kutta four...
متن کامل