Groovin’ with the Big Band(width)
نویسندگان
چکیده
This paper is concerned with efficiently assigning bandwidth to radio transmitters, so as to avoid interference. We assume that the area (city, state, etc) is divided into a honeycomb hexagonal grid, and that transmitters are placed at the centers of the hexagons, which have side length s. The bandwidth assigned to a transmitter will be represented by a channel number. To avoid interference, the following constraints must be met: two transmitters within 2s must be assigned channels that differ by at least 2, and transmitters within 4s must be assigned channels that differ by at least 1. We seek to find the span of a network, which is the smallest integer, n, such that a proper assignment configuration exists on the grid that uses no channel higher than n. We find that with these constraints, the span of a grid (indeed, the entire plane), is 9. To prove this result, we must show that a proper assignment does not exist using number of at most 8, and we must also demonstrate how the assignments can be made using the integers 1 through 9. We show that, in fact, there is a unique such pattern which meets the constraints. We then generalize to the constraint that channels for transmitters within 2s must differ by at least k, while channels for transmitters within 4s must still differ by at least 1. We prove that for k=1, the span is 7; for k=2, the span is 9 (our original case); for k=3, the span is 12; and for k>3, the span is 2k+7. In each case, we show that the span cannot be smaller, and also give an example with that span. Each example is a simple pattern that can be efficiently extended to grids of arbitrarily large size, and these patterns guarantee that the bandwidth used is the smallest possible. We again generalize to the constraint that channels for transmitters within 2s must differ by at least k, while channels for transmitters within 4s must differ by at least m. We demonstrate a minimum bound for the span, 1+2k+4m, and also provide an example with span 1+2k+6m. This example is again a simple pattern that can be efficiently extended to larger grids. We also demonstrate that, though we have not proven that 1+2k+6m is the span, it is still an effective way to minimize the bandwidth used. Thirdly, we generalize to 3 levels of interference, so that we have the constraints that channels for transmitters within 2s must differ by at least k, channels for transmitters within 4s must differ by at least m, and channels for transmitters within 6s must differ by at least n. We demonstrate a method for building up this 3-level interference from an assignment configuration which is valid for a 2-layer interference. We show that the span, for all k, m, and n, is less than 1+2k+6m+18n, and we motivate that this is an efficient way to minimize bandwidth allocation. In summary, we completely solve parts A,B, and C of the problem statement, as well as providing several efficient, useful, and beautiful generalizations of the problem.
منابع مشابه
Comparison Of Hyperbolic And Constant Width Simultaneous Confidence Bands in Multiple Linear Regression Under MVCS Criterion
A simultaneous confidence band gives useful information on the reasonable range of the unknown regression model. In this note, when the predictor variables are constrained to a special ellipsoidal region, hyperbolic and constant width confidence bonds for a multiple linear regression model are compared under the minimum volome confidence set (MVCS) criterion. The size of one speical an...
متن کاملEffect of the Sulfur Concentration on the Optical Band Gap Energy and Urbach Tail of Spray-Deposited ZnS Films
Zinc sulfide (ZnS) films were deposited through a simple and low cost spray pyrolytic technique using mixed aqueous solutions of zinc nitrate and thiourea. The structural and optical properties of these films were investigated as a function of initial (Zn:S) molar ratio in the precursor solution, which varied between (1:1) and (1:3). X-ray diffraction (XRD) analysis revealed that wurtzite...
متن کاملOptimization of Thermalisation Loss in the Quantum Dot Solar Cells using a Finite Element Method
As thermalisation loss is the dominant loss process in the quantum dot intermediate band solar cells (QD-IBSCs), it has been investigated and calculated for a QD-IBSC, where IB is created by embedding a stack of InAs(1-x) Nx QDs with a square pyramid shape in the intrinsic layer of the AlPySb(1-y) p-i-n structure. IB, which is an optically coupled but electrically isolated mini-band, divides th...
متن کاملDesign of Band Width Scheduling for Big Data Transfers in High Performance Networks
495 DESIGN OF BAND WIDTH SCHEDULING FOR BIG DATA TRANSFERS IN HIGH PERFORMANCE NETWORKS R. Banumathi* & A. Anitha** * PG Scholar, Department of Master of Computer Applications, Dhanalakshmi Srinivasan Engineering College, Perambalur, Tamilnadu ** Assistant Professor, Department of Master of Computer Applications, Dhanalakshmi Srinivasan Engineering College, Perambalur, Tamilnadu Abstract: Cloud...
متن کاملAsymmetrical-fed RHCP Wide-Band Slot Element for X-Band applications
An outstanding square slot element, for x-band wireless applications with asymmetric coplanar waveguide fed (CPW) is proposed. Various shapes of metallic strips are utilized as grounded stubs for providing Right Hand Circular Polarization (RHCP) functionality and wide-band properties. By adjusting the proposed stubs and hook-shaped radiator, length and positions, wider impedance band width is o...
متن کاملElectronic properties of hydrogenated porous Graphene based nanoribbons: A density functional theory study
The structural and electronic properties of the hydrogenated porous graphene nanoribbons were studied by using density functional theory calculations. The results show that the hydrogenated porous graphene nanoribbons are energetically stable. The effects of ribbon type and ribbon width on the electronic properties of these nanoribbons were investigated. It was found that both armchair and zigz...
متن کامل