Non-minimum Phase Model of Vertical Position Electro-hydraulic Cylinder for Trajectory Zpetc
نویسندگان
چکیده
Hydraulic actuator has been widely used in industrial applications due to its fast response and capability of moving heavy load. The nonlinear properties of hydraulic cylinder had challenged researchers to design a suitable controller for position control, motion control and tracking control. Based on these problems, we had done a real-time digital tracking control studies on electrohydraulic cylinder using trajectory zero phase error tracking control (ZPETC) without factorization of zeros polynomial algorithm. With the proposed strategy, the controller parameters are determined using comparing coefficients methods. The electro-hydraulic system mathematical model is approximated using system identification technique with non-minimum phase system being considered. The real-time experimental result will be compared with simulation result using a model from a real plant. Keywords— Feedforward Control, ZPETC, System identification, pole placement, non-minimum phase INTERNATIONAL JOURNAL ON SMART SENSING AND INTELLIGENT SYSTEMS, VOL. 5, NO. 2, JUNE 2012
منابع مشابه
Trajectory Adaptive Zpet Controller without Factorization of Zeros for Non-minimum Phase System in Application to Real-time Digital Tracking Control of Electro-hydraulic Actuator
Electro-hydraulic actuators are very important tools for industrial processes because they provide linear movement, fast response and accurate positioning of heavy load. Recently, with the research and development of mathematics, control theory and basic theory of hydraulic, hydraulic control technology has been developed and has been widely used in many applications such as industrial automati...
متن کاملPerfect Tracking Control with Discrete-time Lqr for a Non-minimum Phase Electro-hydraulic Actuator System
This paper presents a perfect tracking control for discrete-time nonminimum phase of electro-hydraulic servo (EHS) system by adopting a combination of feedback and feedforward controller. A linear-quadratic-regulator (LQR) is firstly design as a feedback controller and a feedforward controller is then proposed to eliminate the phase error emerge by the LQR controller during the tracking control...
متن کاملContouring Control of Non-Minimum Phase XY Table System using Trajectory ZPETC
Non-minimum phase (NMP) model is a discrete-time model obtained from small or reducing sampling-time of open-loop input and output experimental data. The classical feed-forward controller design of this model using inverse of the closed-loop transfer function would produce an unstable tracking control. This is due to phase and gain errors that caused by NMP zero. Thus, zero phase error tracking...
متن کاملThe Velocity Control of the Electro-hydraulic Servo System
Abstract In general two basic methods are used for controlling the velocity of a hydraulic cylinder. First by an axial variable-displacement pump for controls flow to the cylinder. This configuration is commonly known as a hydrostatic transmission. Second by proportional valve powered by a constant-pressure source, such as a pressure compensated pump, drives the hydraulic cylinder. In this stud...
متن کاملOptimal Design and Hybrid Control for the Electro-Hydraulic Dual-Shaking Table System
Abstract: This paper is to develop an optimal electro-hydraulic dual-shaking table system with high waveform replication precision. The parameters of hydraulic cylinders, servo valves, hydraulic supply power and gravity balance system are designed and optimized in detail. To improve synchronization and tracking control precision, a hybrid control strategy is proposed. The cross-coupled control ...
متن کامل