Ultraviolet radiation emitted by CO(2) arc welding.
نویسندگان
چکیده
The arcs associated with arc welding emit high levels of ultraviolet radiation (UVR), and this often causes acute injuries in the workplace, particularly photokeratoconjunctivitis. It is important to know the level of UVR emitted by arc welding under various conditions, as this information will help in evaluating potential UVR hazards in welding workplaces and taking protective measures against it. In this study, the ACGIH effective irradiance for UVR was measured experimentally for CO(2) arc welding in order to evaluate its UVR hazards. A welding robot was used in the experiment in order to realize reproducible and consistent welding operations. The effective irradiance at 1 m from the arc was in the range 0.28-7.85 W/m(2) (28-785 microW/cm(2)) under the study conditions. The corresponding permissible exposure time per day is only 4-100 s, suggesting that UVR from CO(2) arc welding is actually hazardous for the eye and skin. It was found that the effective irradiance is inversely proportional to the square of the distance from the arc, is strongly dependent on the direction of emission from the arc with a maximum at 50-60 degrees from the plate surface, and tends to increase with welding current.
منابع مشابه
Hazard of ultraviolet radiation emitted in gas tungsten arc welding of aluminum alloys
Ultraviolet radiation (UVR) emitted during arc welding frequently causes keratoconjunctivitis and erythema. The extent of the hazard of UVR varies depending on the welding method and conditions. Therefore, it is important to identify the levels of UVR that are present under various conditions. In this study, we experimentally evaluated the hazard of UVR emitted in gas tungsten arc welding (GTAW...
متن کاملHazard of ultraviolet radiation emitted in gas metal arc welding of mild steel
OBJECTIVES Ultraviolet radiation (UVR) emitted during arc welding frequently causes keratoconjunctivitis and erythema in the workplace. The degree of hazard from UVR exposure depends on the welding method and conditions. Therefore, it is important to identify the UVR levels present under various conditions. METHODS We experimentally evaluated the UVR levels emitted in gas metal arc welding (G...
متن کاملRetinal burns caused by exposure to MIG-welding arcs: report of two cases.
A new generation of arc welder has recently become widely available at a price which is within reach of most amateurs and part-time mechanics, known as the MIG welder (metal-arc inert gas welder). In MIG welding the arc is ensheathed in a stream of inert gas which prevents the molten metal from oxidising. The stream of gas changes the character of the emitted radiation, and it is possible that ...
متن کاملMeasurement of ultraviolet radiation from welding arcs.
It is well khown that welding arcs emit intense ultraviolet radiation and those who conduct welding operations or work nearby are exposed to the radiation and often suffer injuries. It is desirable to evaluate the ultraviolet radiation from the viewpoint of industrial health. But, there have been few quantitative studies of this radiation. We determined the ultraviolet effective irradiance, bas...
متن کاملبررسی میزان مواجهه شغلی با پرتوهای غیریونساز و اثربخشی وسایل حفاظت فردی در انواع جوشکاری قوس الکتریکی متداول
Introduction: Welding is considered to be one of the main sources of occupational exposure to non ionizing radiations. The present study was conducted to examine the rate of occupational exposure to non-ionizing radiation in common welding processes. Materials and Methods: In the present descriptive analytical study, occupational exposure to different types of non-ionizing radiations in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The Annals of occupational hygiene
دوره 45 7 شماره
صفحات -
تاریخ انتشار 2001