Wavelet Transform Analysis of Truncated Fringe Patterns in 3-D Surface Profilometry
نویسنده
چکیده
Wavelet transform analysis of projected fringe pattern for phase recovery in 3-D shape measurement of objects is investigated. The present communication specifically outlines and evaluates the errors that creep in to the reconstructed profiles when fringe images do not satisfy periodicity. Three specific cases that give raise to non-periodicity of fringe image are simulated and leakage effects caused by each one of them are analyzed with continuous complex Morlet wavelet transform. Same images are analyzed with FFT method to make a comparison of the reconstructed profiles with both methods. Simulation results revealed a significant advantage of wavelet transform profilometry (WTP), that the distortions that arise due to leakage are confined to the locations of discontinuity and do not spread out over the entire projection as in the case of Fourier transform profilometry (FTP).
منابع مشابه
Effective bias removal for fringe projection profilometry using the dual-tree complex wavelet transform.
When reconstructing the three-dimensional (3D) object height profile using the fringe projection profilometry (FPP) technique, the light intensity reflected from the object surface can yield abruptly changing bias in the captured fringe image, which leads to severe reconstruction error. The traditional approach tries to remove the bias by suppressing the zero spectrum of the fringe image. It is...
متن کاملHyper-accurate flexible calibration technique for fringe-projection-based three-dimensional imaging
Fringe-projection-based (FPB) three-dimensional (3D) imaging technique has become one of the most prevalent methods for 3D shape measurement and 3D image acquisition, and an essential component of the technique is the calibration process. This paper presents a framework for hyper-accurate system calibration with flexible setup and inexpensive hardware. Owing to the crucial improvement in the ca...
متن کاملPhase recovery from fringe patterns with global carriers: approach based on Hilbert transform and wavelet de-noising techniques
Fringe pattern analysis is an important task in optical metrology. Fringe patterns can be formed by optical interference, by projection techniques, by overlapping two similar wave structures, etc. Patterns with constant global angular carriers represent straight lines in the field-of-view. The presence of an object under investigation distorts the fringes. Analysis of these distortions is calle...
متن کاملFringe pattern analysis using a one-dimensional modified Morlet continuous wavelet transform
This paper proposes the use of a modified Morlet wavelet in order to demodulate fringe patterns in conjunction with the one-dimensional continuous wavelet transform (1D-CWT). Our investigations demonstrate that the modified Morlet wavelet produces better results compared to the conventional Morlet wavelet when used in fringe pattern analysis. This novel technique offers superior performance in ...
متن کاملThree-dimensional profilometry based on shift estimation of projected fringe patterns.
This paper presents a new approach to fringe pattern profilometry. In this paper, a generalized model describing the relationship between the projected fringe pattern and the deformed fringe pattern is derived, in which the projected fringe pattern can be arbitrary rather than being limited to being sinusoidal, as are those for the conventional approaches. Based on this model, what is believed ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007