Process intensification in duplex pressure swing adsorption
نویسندگان
چکیده
As an alternative to the pressure swing adsorption (PSA) based on the Skarstrom cycle or its variants, a novel two-bed PSA--called duplex PSA--has been proposed by Hirose and independently by Leavitt to get both products of high purities. Simulation and experimental studies on duplex PSA for CO2 capture indicate that CO2 can be enriched to 95 mol% of feed containing 20 mol% CO2 and 80 mol% N2. Kumar et al. proposed a modification to duplex PSA to enhance the product purity and productivity. The studies on the modified duplex PSA show that the product purities in excess of 99 mol% are feasible. In this work, simulation studies have been carried out to explore the attainable product purities and possible process intensification for CO2 capture with the original and modified duplex PSA and a 4-bed PSA. The studies indicate that it is possible to obtain both product purities in excess of 98.5mol%. Further, these studies show that, for a product purity of 95 mol% CO2, the volume reduction of beds that can be realized with modified duplex PSA is about 7 times when compared with 4-bed PSA and 125 times the original duplex PSA.
منابع مشابه
Investigation of carbon dioxide capture from hydrogen using the thermal pressure swing adsorption process: Central composite design modeling
In this study pre-combustion capture of carbon dioxide from hydrogen was performed using a 5A zeolite adsorber. A one column thermal pressure swing adsorption (TPSA) process was studied in the bulk separation of a CO2/H2 mixture (50:50 vol%). The adsorption dynamics of the zeolite bed were investigated by breakthrough experiments to select the suitable range for operational factors in the desig...
متن کاملModeling and Comparison of Optimized Isotherm Models for H2, N2, CO, CH4 and CO2 Adsorption Using Cuckoo Search Optimization Algorithm
In this study, modeling of hydrogen, nitrogen, carbon monoxide, methane and carbon dioxide sorption on UTSA-16 framework extrudates in the pressure swing adsorption process was carried out. The pure gas adsorption of these gases at the pressure range (0 to 80) bars at (298, 313, and 338) K have also been measured in a fixed bed. Langmuir, Toth, Sips, UNILAN, Virial and Dubinin-Astakhov adsorpti...
متن کاملSimulation of Pressure Swing Adsorption Process of Butane/Air Separation in Carbon-Coated Ceramic Monolithic Adsorber
The new shaped structured adsorber, carbon monolithic adsorber, are characterized by straight parallel channels separated by thin wall, high void fraction and large geometric surface area, resulting in a low pressure drop under high flow rate and large contact area. These properties make it have the advantage on adsorption application. This study simulates the adsorption separation of 30% butan...
متن کاملCapture of Co 2 by Vacuum Swing Adsorption Process Using Activated Carbon Beads
Pitch-based AC beads (particle size about 1mm) were synthesized from coal tar pitch through the emulsion method without using binder material in our laboratory. Adsorption equilibrium and adsorption kinetics of CO2 and N2 on the activated carbon beads were studied experimentally and theoretically. Based on the equilibrium and kinetics data, an improved vacuum-pressure swing adsorption (VPSA) pr...
متن کاملCompressed Air and Gas Purification and Fractionation for High Purity Applications by Improved PSA Processes
An objective of this paper is to review the purity requirements for clean air and gases used in industrial and laboratory applications. Also described are the principles applied in the design of regenerative pressure swing adsorption systems to meet the most recent process requirements. Methods developed to reduce the energy consumption of the pressure swing process are described.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Computers & Chemical Engineering
دوره 35 شماره
صفحات -
تاریخ انتشار 2011