Direct Comparison of Structural and Electrical Properties of Epitaxial (001)-, (116)-, and (103)-Oriented SrBi2Ta2O9 Thin Films on SrTiO3 and Silicon Substrates
نویسندگان
چکیده
Anisotropies of the properties of the bismuth-layered perovskite SrBi2Ta2O9 (SBT) have been investigated using epitaxial thin films grown by pulsed laser deposition both on conducting Nb-doped SrTiO3 (STO) single crystal substrates and on Si(100) substrates. It has been found that the three-dimensional epitaxy relationship SBT(001)||STO(001); SBT ] 0 1 1 [ ||STO[100] can be applied to all SBT thin films on STO substrates of (001), (011), and (111) orientations. An about 1.7 times larger remanent polarization was obtained in (103)-oriented SBT films than in that of (116) orientation, while the (001)-oriented SBT films revealed no ferroelectricity along their c-axis. Non-c-axis-oriented SBT films with a well-defined (116) orientation were also grown on silicon substrates for the first time. They were deposited on Si(100) covered with a conducting SrRuO3 (110) bottom electrode on a YSZ(100) buffer layer.
منابع مشابه
A Study of ZnO Buffer Layer Effect on Physical Properties of ITO Thin Films Deposited on Different Substrates
The improvement of the physical properties of Indium Tin Oxide (ITO) layers is quite advantageous in photovoltaic applications. In this study the ITO film is deposited by RF sputtering onto p-type crystalline silicon (c-Si) with (100) orientation, multicrystalline silicon (mc-Si), and glass substrates coated with ZnO and annealed in vacuum furnace at 400°C. Electrical, optical, structural a...
متن کاملThermal Oxidation Times Effect on Structural and Morphological Properties of Molybdenum Oxide Thin Films Grown on Quartz Substrates
Molybdenum oxide (α-MoO)thin films were prepared on quartz and silicon substrates by thermal oxidation of Mo thin films deposited using DC magnetron sputtering method. The influence of thermal oxidation times ranging from 60-240 min on the structural and morphological properties of the preparedfilms was investigated using X-ray diffraction, Atomic force microscopy and Fourier transform infrared...
متن کاملStructural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films
Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...
متن کاملStructural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films
Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...
متن کاملStructural and electrical properties of c-axis epitaxial homologous SrmÀ3Bi4TimO3m¿3 „mÄ3, 4, 5, and 6... thin films
c-axis epitaxial thin films of Bi-layered homologous Srm23Bi4TimO3m13 (m53, 4, 5, and 6! were fabricated on ~001! SrTiO3 single crystal substrates by pulsed laser deposition, respectively. Microstructures of the films were systematically characterized by x-ray diffraction ~including u–2u scans, rocking curve scans and f scans!, atomic force microscopy, and transmission electron microscope. Epit...
متن کامل