Corrigendum: Lithium-ion-based solid electrolyte tuning of the carrier density in graphene
نویسندگان
چکیده
We have developed a technique to tune the carrier density in graphene using a lithium-ion-based solid electrolyte. We demonstrate that the solid electrolyte can be used as both a substrate to support graphene and a back gate. It can induce a change in the carrier density as large as 1 × 1014 cm-2, which is much larger than that induced with oxide-film dielectrics, and it is comparable with that induced by liquid electrolytes. Gate modulation of the carrier density is still visible at 150 K, which is lower than the glass transition temperature of most liquid gating electrolytes.
منابع مشابه
Control ion transport by tuning the crystalline morphology in polyethylene oxide - based solid electrolyte
Submitted for the MAR13 Meeting of The American Physical Society Control ion transport by tuning the crystalline morphology in polyethylene oxide-based solid electrolyte SHAN CHENG, CHRISTOPHER LI, DERRICK SMITH, Drexel University — The crystalline structure of polyethylene oxide (PEO) strongly affects the ion transport in solid PEO-Lithium salt electrolytes. Four possible phases can exist in a...
متن کاملGraphene-analogues Boron Nitride nanosheets with ultrahigh ionic liquid uptake capacity as quasi-solid electrolytes
Inorganic nanoparticles are typically used as electrode materials in lithium batteries. However, to cope with the most challenge that solid electrolytes have low ionic conductivity at room or lower temperatures, here we show graphene-analogues boron nitride (g-BN) nanosheets absorbing a large quantity of ILs as a solid-like electrolyte. The layered g-BN nanosheets have very high specific surfac...
متن کاملImprovement of ionic conductivity of gadolinium doped ceria electrolyte with nano CuO sintering aid
Gadanium doped cerium oxide ceramic (GDC) is widely used as solid electrolytes in solid oxide fuel cells because of its high oxygen ion conductivity. In this study, the effect of addition of nano CuO as a sintering aid on the properties of GDC electrolyte were investigated. For this purpose, 0.2, 0.5, and 1% mole of nano Cuo was added to GDC ceramics, which was synthesized by the solid-state me...
متن کاملSurface Engineering and Design Strategy for Surface‐Amorphized TiO2@Graphene Hybrids for High Power Li‐Ion Battery Electrodes
Surface amorphization provides unprecedented opportunities for altering and tuning material properties. Surface-amorphized TiO2@graphene synthesized using a designed low temperature-phase transformation technique exhibits significantly improved rate capability compared to well-crystallized TiO2@graphene and bare TiO2 electrodes. These improvements facilitates lithium-ion transport in both inser...
متن کاملElectrode Materials for Lithium Ion Batteries: A Review
Electrochemical energy storage systems are categorized into different types, according to their mechanisms, including capacitors, supercapacitors, batteries and fuel cells. All battery systems include some main components: anode, cathode, an aqueous/non-aqueous electrolyte and a membrane that separates anode and cathode while being permeable to ions. Being one of the key parts of any new electr...
متن کامل