Crack Mitigation in Concrete: Superabsorbent Polymers as Key to Success?
نویسندگان
چکیده
Cracking is a major concern in building applications. Cracks may arise from shrinkage, freeze/thawing and/or structural stresses, amongst others. Several solutions can be found but superabsorbent polymers (SAPs) seem to be interesting to counteract these problems. At an early age, the absorbed water by the SAPs may be used to mitigate autogenous and plastic shrinkage. The formed macro pores may increase the freeze/thaw resistance. The swelling upon water ingress may seal a crack from intruding fluids and may regain the overall water-tightness. The latter water may promote autogenous healing. The use of superabsorbent polymers is thus very interesting. This review paper summarizes the current research and gives a critical note towards the use of superabsorbent polymers in cementitious materials.
منابع مشابه
Smart superabsorbent polymers for self-sealing and -healing of mortar
ID No: 54 Abstract: Concrete is an important building material, due to its ease to use and relatively low cost. However, the presence of cracks endangers the durability of concrete and can result in reinforcement corrosion since a pathway for harmful particles dissolved in fluids and gases is generated. Manual repair costs can go up to half of the annual construction budget. Instead, introducin...
متن کاملEffect Of Multivalent Ions On The Swelling And Mechanical Behavior Of Superabsorbent Polymers (Saps) For Mitigation Of Mortar Autogenous Shrinkage
ii I dedicate my thesis to my loving parents who have always stood by my side. iii ACKNOWLEDGEMENTS
متن کاملFreeze Thaw Durability of Internally Cured Concrete Made Using Superabsorbent Polymers
The use of superabsorbent polymers (SAPs) to produce internally cured concrete has been shown to be effective in reducing the potential for restrained shrinkage cracking of high performance concrete mixtures. However, not much is known regarding the freeze–thaw durability of concrete mixtures that incorporate SAPs for internal curing (IC). When SAP particles desorb (or partially desorb) the “wa...
متن کاملSelf-healing concrete and environmental health
Nanotechnology will serve as a suitable solution to achieve high performance in future construction and construction. Using this new technology, creativity and innovation can be achieved in the building industry. one of these new technologies of smart concrete is that in recent years, many researches and experiments have been done in scientific research centers around the world, so that the con...
متن کاملExperimental Investigation of Corrosion Cracking in Reinforced Concrete Beams Containing Nano Wollastonite
Cracking of the concrete cover due to corrosion is defined as the serviceability limit state of reinforced concrete structures. This study evaluated the influence of a mineral admixture i.e. nano wollastonite on corrosion performance and serviceability of reinforced concrete structures by performing an accelerated corrosion test on ten reinforced concrete beams under a sustained load. To do so,...
متن کامل