Parameter estimation and actuator friction analysis for a mini excavator
نویسندگان
چکیده
Gravitational and friction terms play an important role in achieving high performance control of heavy-duty hydraulic machines, such as excavators. In this paper, a new approach for decoupled estimation of the gravitational parameters is presented. Static experiments are carried out with an instrumented computer-controlled mini excavator to estimate the gravitational parameters. Load pins are used for indirect measurement of the joint torques from cylinder reaction forces. It is investigated via experiments that bucket payload can be estimated with a 5% accuracy. Furthermore, direct measurement of the actuators’ friction shows that considerable amount of static friction exists inside the cylinders that cannot be neglected.
منابع مشابه
Impedance Control of a Teleoperated Mini Excavator
A position-based impedance controller for excavator-type manipulators has been developed in our laboratory. This paper describes the proposed impedance controller and presents supporting experimental results. First, the problem of impedance control for a single hydraulic actuator is addressed and a method is presented for stability analysis. Steady-state position and force tracking of the close...
متن کاملNonlinear observer and parameter estimation for electropneumatic clutch actuator
This paper proposes a nonlinear observer for an electropneumatic clutch actuator. Parameter estimation of the clutch load characteristic and friction are also treated through adaptation. Estimates of piston velocity, chamber pressures and dynamic friction state are made based on piston position measurement only. Persistence of excitation conditions for convergence of the estimation error are de...
متن کاملDesign of Haptic Device for Excavator with Pressure Transmitter
The number of dismantling sites for buildings has been rapidly increased and these processes are very dangerous. So many research papers have been published addressing the development of a remote controller for the dismantling equipments. In this paper, a novel concept of applying haptic control is proposed for the remote control of excavator-like dismantling equipment. As a haptic device syste...
متن کاملForce and Position Control for Electrohydraulic Systems of a Robotic Excavator
In impedance control of hydraulic excavators the piston position and ram force of each hydraulic cylinder for the axis control of the boom, arm, and bucket can be determined. The problem is thus how to find the control voltage applied to the servovalves to track these commands to the hydraulic systems. This paper presents analytic, simulation and experimental results for controllers that have b...
متن کاملCancam Fault Detection and Classification of an Electrohydrostatic Actuator Using a Neural Network Trained by the Smooth Variable Structure Filter
A multilayered neural network is a multi-input, multioutput (MIMO) nonlinear system in which training can be regarded as a nonlinear parameter estimation problem by estimating the network weights. In this paper, the relatively new smooth variable structure filter (SVSF) is used for the training of a nonlinear multilayered feed forward network. The SVSF is a recursive sliding mode parameter and ...
متن کامل