Directly written monolithic waveguide laser incorporating a distributed feedback waveguide-Bragg grating.
نویسندگان
چکیده
We report the fabrication and performance of the first C-band directly written monolithic waveguide laser (WGL). The WGL device was created in an erbium- and ytterbium-doped phosphate glass host and consisted of an optical waveguide that included a distributed feedback Bragg grating structure. The femtosecond laser direct-write technique was used to create both the waveguide and the waveguide-Bragg grating simultaneously and in a single processing step. The waveguide laser was optically pumped at approximately 980 nm and lased at 1,537 nm with a bandwidth of less than 4 pm.
منابع مشابه
Distributed feedback-distributed Bragg reflector coupled cavity laser with a Ti:(Fe:)Er:LiNbO3 waveguide.
A thermally fixed photorefractive Bragg grating is written in a single-mode Ti:Fe:Er:LiNbO3 channel waveguide and used to develop a distributed feedback-distributed Bragg reflector coupled cavity laser with a second broadband dielectric cavity mirror. The optically pumped (lambda(p) = 1480 nm, P = 130 mW) laser emits in single-frequency operation as much as 8 mW at lambda = 1557.2 nm with a slo...
متن کاملUltrafast laser written active devices
Direct-write optical waveguide device fabrication is probably the most widely studied application of femtosecond laser micromachining in transparent dielectrics at the present time. Devices such as buried waveguides, power splitters, couplers, gratings, optical amplifiers and laser oscillators have all been demonstrated. This paper reviews the application of the femtosecond laser direct-write t...
متن کاملAsymmetric Twin-Waveguide 1.55- m Wavelength Laser with a Distributed Bragg Reflector
We demonstrate a single frequency, 1.55 m wavelength laser based on an asymmetric twin-waveguide structure using a single growth step and a simple fabrication process. The external Bragg grating is formed on the passive ridge waveguide, optically coupled to the twin-guide gain section using a low loss, tapered mode transformer. The grating is produced by near-field holographic printing using a ...
متن کاملDirect laser written waveguide-Bragg gratings in bulk fused silica.
Optical waveguides that incorporate Bragg gratings have been written in bulk fused silica by using the femtosecond laser direct-write method and without the need for lithography or ion-beam techniques. A single manufacturing process is used to create waveguide-Bragg grating reflectors for operation in the C band.
متن کامل<Edited by Milan Brandt and Erol Harvey> POINT BY POINT FEMTOSECOND LASER INSCRIPTION OF FIBRE AND WAVEGUIDE BRAGG GRATINGS FOR PHOTONIC DEVICE FABRICATION
We present a flexible and rapid method for the production of Bragg gratings in a range of optical waveguides such as optical fibres and direct laser-written waveguides in bulk media. Using a low repetition rate (1 kHz) femtosecond laser, Bragg grating structures can be written in a point-by-point fashion (where each laser pulse inscribes one period of the Bragg structure) in both passive and ac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics letters
دوره 33 9 شماره
صفحات -
تاریخ انتشار 2008