Stability of diluted adenosine solutions in polyvinyl chloride infusion bags.

نویسندگان

  • Melissa Kaltenbach
  • David J Hutchinson
  • Jessica E Bollinger
  • Fang Zhao
چکیده

PURPOSE The stability of diluted adenosine solutions in polyvinyl chloride infusion bags was studied. METHODS Adenosine 50-, 100-, and 220-μg/mL solutions were prepared in 50-mL polyvinyl chloride (PVC) infusion bags containing 0.9% sodium chloride injection or 5% dextrose injection and stored at room temperature (23-25 °C) or under refrigeration (2-8 °C). Each sample of every combination of concentration, diluent, and storage temperature was prepared in triplicate, yielding 36 samples. The samples were assayed using a stability-indicating, reverse-phase high-performance liquid chromatographic method immediately after preparation (time zero) and at 24 hours, 48 hours, 7 days, and 14 days. pH was measured at time zero, 48 hours, 7 days, and 14 days. Time zero concentrations were calculated from the equation produced from a calibration curve of standards ranging from 10 to 500 μg/mL. Samples were also visually inspected against a light background for clarity, color, and the presence of crystalline particulate matter. Stability was defined as retaining at least 90% of the initial adenosine concentration. RESULTS After 14 days, all samples retained greater than 98% of the initial adenosine concentration, with no evidence of adsorption, visible precipitation, or considerable change in pH, suggesting minimal to no loss of product due to degradation or adsorption. CONCLUSION Adenosine 50-, 100-, and 220-μg/mL solutions in 50-mL PVC infusion bags containing 0.9% sodium chloride injection or 5% dextrose injection stored at room temperature and refrigerated conditions were stable for at least 14 days.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Post-reconstitution Stability of Telavancin with Commonly Used Diluents and Intravenous Infusion Solutions

OBJECTIVE The post-reconstitution chemical stability and microbial challenge hold time of nonpreserved telavancin for injection was determined using common reconstitution diluents and intravenous (IV) infusion solutions stored at room temperature with light (ambient) or at 2°C to 8°C without light (refrigeration). METHODS Telavancin was reconstituted with 5% dextrose, 0.9% normal saline, or s...

متن کامل

Treatment of invasive fungal infections: stability of voriconazole infusion solutions in PVC bags.

Voriconazole is a novel broad-spectrum antifungal drug, employed in the treatment of invasive fungal infections, and represents an alternative to amphotericin B treatment. The manufacturer recommends that any unused reconstituted product should be stored at 2 masculineC to 8 masculineC, for no more than 24 h, but no recommendations about i.v. infusion solutions are given. Previous works have re...

متن کامل

Stability and compatibility of topotecan hydrochloride for injection with common infusion solutions and containers.

The stability and compatibility of topotecan hydrochloride with common infusion solutions and containers were studied. During this study, the leaching of diethylhexyl phthalate (DEHP), a major plasticizer of some polyvinyl chloride (PVC) materials was also investigated. A formulation of topotecan hydrochloride was added to 50 ml PVC infusion bags, polyolefin infusion bags and 150 ml glass bottl...

متن کامل

Long-term stability of 5-Fluorouracil in 0.9% sodium chloride after freezing, microwave thawing, and refrigeration.

OBJECTIVE To investigate the stability of 5-fluorouracil diluted in 0.9% sodium chloride (normal saline [NS]) after freezing, microwave thawing, and storage for 28 days at 5°C ± 3°C. METHODS Polyvinylchloride (PVC) infusion bags (n = 5) containing 5-fluorouracil 800 mg/100 mL were frozen for 79 days at -20°C. The bags were then thawed in a microwave oven and stored at 5°C ± 3°C for 28 days. T...

متن کامل

Diluting ferric carboxymaltose in sodium chloride infusion solution (0.9% w/v) in polypropylene bottles and bags: effects on chemical stability.

OBJECTIVES This study was designed to assess the physicochemical stability of colloidal ferric carboxymaltose solution (Ferinject) when diluted and stored in polypropylene (PP) bottles and bags for infusion. METHODS Two batches of ferric carboxymaltose solution (Ferinject) were diluted (500 mg, 200 mg and 100 mg iron in 100 mL saline) in PP bottles or bags under aseptic conditions. The dilute...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • American journal of health-system pharmacy : AJHP : official journal of the American Society of Health-System Pharmacists

دوره 68 16  شماره 

صفحات  -

تاریخ انتشار 2011