Fracture Failure Mechanism
نویسندگان
چکیده
The present study investigates the failure mechanisms of industrial fiber materials 13 a custom designed fiber cutting performance test bench. The fracture morpholog 14 fibers are examined by scanning electron microscopy. The analysis reveals that fiber cutting can be 15 distinguished according to four distinct stages of fiber failure represented by shearing, cutting, 16 brittle fracture, and tensile failure, 17 processes of crack initiation, extension and fracture. The results of fractographic analysis are 18 further verified by an analysis of the blade assembly speed with respect to time over the entire 19 fracture failure process based on high 20 blade assembly speed are fully consistent. 21
منابع مشابه
Fracture Mechanism of CoCrMo Porous Nano-composite Prepared by Powder Metallurgy Route
The main aim of this research was to find the mechanism for the failure of the CoCrMo porous nano-composite by characterizing microstructural changes and fractured surface after compression test. For this purpose, porous nano-composites were prepared with the addition of bioactive glass nano-powder to Co-base alloy with 22.5% porosity by the combination of space-holder and powder metallurgy tec...
متن کاملStudy on the strengthening mechanisms and failure modes of the ultra-fine grained tri-modal Al5083-5wt. %B4C-Al2024 and Al5083-5 wt. %B4C-Al5083 composites
In this paper, the influence of Al2024 and Al5083 aluminum alloy coarse grains on mechanical properties and fracture mechanism of Al5083-B4C tri-modal composite has been discussed. Al5083 alloy powders with 5 wt. % of boron carbide were milled for 36 hours and 25 and 50 wt. % of coarse grain (CG) Al2024 and Al5083 powders were added to the milled powders and then hot press under argon atmospher...
متن کاملEffect of Rock Fracture Filling on Mode I and II Fracture Toughness
This paper focuses on some fracture toughness tests performed on the pre-cracked Brazilian specimens of rock-like materials. Also the effect of rock fracture filling on the fracture toughness was considered experimentally. Fracture toughness is a key parameter for studying the crack propagation and fragmentation processes in rock structures. Fracture mechanics is an applicable tool to improve ...
متن کاملLife Estimate of a Compressor Blade through Fractography
Failure analysis of fractured components provides some information about the causes and conditions of fracture. Fractography is an indispensable part of the failure analysis as it is usually the only means by which the failure mechanism can be established. By using fractography, some information such as component’s life, values of the stress intensity factor and the applied stress can be calcul...
متن کاملFailure Mechanisms Investigation in Thermal Barrier Coatings under Isothermal and Non-sothermal Fatigue Loadings using Design of Experiments
In this article, failure and fracture mechanisms in an aluminum alloy (which has been used in diesel internal combustion engines), with and without ceramic thermal barrier coatings, have been investigated under isothermal and non-isothermal fatigue loadings. In this research, the base material is an aluminum-silicon-magnesium alloy and the thermal barrier coating includes a metallic bond coat l...
متن کاملMetallurgical fatigue failure analysis of the brazed steam turbine blade
In this paper, failure mechanism of a 17th stage blade of an 82.5 MW steam turbine that caused damage to the internal turbine compartment and the adjacent blade equipment has been studied. In order to determine the cause of failure and prevent similar events, various metallurgical and mechanical investigations including chemical composition analysis, metallography and microstructural analysis, ...
متن کامل