Active Fault Isolation in MIMO Systems
نویسندگان
چکیده
Active fault isolation of parametric faults in closed-loop MIMO systems are considered in this paper. The fault isolation consists of two steps. The first step is groupwise fault isolation. Here, a group of faults is isolated from other possible faults in the system. The group-wise fault isolation is based directly on the input/output signals applied for the fault detection. It is guaranteed that the fault group includes the fault that had occurred in the system. The second step is individual fault isolation in the fault group. Both types of isolation are obtained by applying dedicated auxiliary inputs and the associated residual outputs.
منابع مشابه
Fault Detection and Isolation of Multi-Agent Systems via Complex Laplacian
This paper studies the problem of fault detection and isolation (FDI) for multi-agent systems (MAS) via complex Laplacian subject to actuator faults. A planar formation of point agents in the plane using simple and linear interaction rules related to complex Laplacian is achieved. The communication network is a directed, and yet connected graph with a fixed topology. The loss of symmetry in the...
متن کاملThe Coupling Relationship among Process Faults, Actuator Faults and Sensor Faults for a Typical MIMO Dynamic System
For a typical MIMO (Multiple-Input Multiple-Output) nonlinear dynamic system, fault detection and isolation usually aim at process faults with an assumption that actuator faults and sensor faults do not occur at the same time, which is not always the case. This paper uses Extended State Observer for real-time process fault detection and fuzzy inference for fault isolation. It then investigates ...
متن کاملActive Fault Tolerant Control of the Continuos-time Systems
Reformulated principle for designing the observer-based regonfiguration control in the continuos-time linear MIMO systems is treated in this paper. Based on the linear matrix inequalities the problem addressed can be indicated as the approach giving the sufficient conditions to design the stable estimator and controller with the on-line based fault estimation and accommodation support. The syst...
متن کاملPassive Robust Fault Detection for Interval LPV Systems using Zonotopes
In this paper the problem of robust fault detection using an interval observer for dynamic systems characterized by LPV (Linear Parameter Varying) models is presented. The observer face the robustness problem using two complementary strategies. Parametric modeling uncertainties are considered unknown but bounded by intervals. Their effect is addressed using an interval state observation method ...
متن کاملSelf-repairing and Adaptive Control of Mimo Systems with Faulty Sensors
This paper presents a design method for a self-repairing control system (SRCS) for multi-input multi-output systems with sensor failures of a stuck-type. Based on dynamic redundancy, the SRCS can replace the faulty sensors with the healthy ones. Exact fault detection can be attained with use of an auxiliary signal and an integrator, and so no diagnostic observer is used. Furthermore, a switched...
متن کامل