Evaluation on masks with exhaust valves and with exhaust holes from physiological and subjective responses.
نویسندگان
چکیده
The purpose of this study was to compare the effects of wearing different kinds of masks on the ear canal temperature, heart rate, clothing microclimate, and subjective perception of discomfort. Ten subjects performed intermittent exercise on a treadmill while wearing the protective masks in a climatic chamber controlled at an air temperature of 25 degrees C and a relative humidity of 70%. Two types of mask-mask A, with exhaust valves and mask B, with exhaust holes-were used in the study. The results of this study indicated: (1) The subjects had a tendency toward lower maximum heart rate when wearing mask A than when wearing mask B. (2) Temperatures and absolute humidities (the outer surface of mask, the microclimate inside the mask, the chest wall skin and microclimate) of mask A were significantly lower than those of mask B. (3) The ear canal temperature increased significantly in mask B as compared to that in mask A. (4) The ear canal temperature showed significant augmentation along with increased temperature and humidity inside the mask microclimate. The mask microclimate temperature also affected significantly the chest microclimate temperature. (5) Mask A was rated significantly lower for perception of humidity, heat, breath resistance, tightness, unfitness, odor, fatigue, and offered less overall discomfort than mask B. (6) Subjective preference for mask A was higher. (7) The ratings of subjective overall discomfort showed significant augmentation along with increased wetness and fatigue. We discuss how the ventilation properties of masks A and B induce significantly different temperature and humidity in the microclimates of the masks and the heat loss of the body, which have profound influences on heart rate, thermal stress, and subjective perception of discomfort.
منابع مشابه
Responses of Lettuce (Lactuca sativa var. longifolia) Against to Different Time Exposure of Air Pollution of Exhaust Emissions
The experiment was conducted in factorial test based on a completely randomized design with three replications in greenhouse of Isfahan University of Technology of Iran. Lettuce seedlings were exposed separately to the exhaust emissions in three different exposure times (10, 20 and 30 days) and after the exposure time, their morphological, physiological and anatomical traits were measured and c...
متن کاملInvestigation of the Effect of Exhaust Gas Recirculation (EGR) on pollutants Emission From Si Engine Exhaust Gasese (RESEARCH NOTES)
This paper reports the results of an experimental investigation on the effect of the EGR on the pollutants emission, especially on oxides of nitrogen, from the exhaust gases and performance of the spark ignition engine. Also along with experimental work, a mathematical model for the determination of the effect of EGR on the peak cycle temperature and for the prediction of its effect on the NOx ...
متن کاملEvaluation of Thermal Barrier Coating in Low Cycle Fatigue Life for Exhaust Manifold
This paper presents low cycle fatigue (LCF) life prediction of a coated and uncoated exhaust manifolds. First Solidworks software was used to model the exhaust manifolds. A thermal barrier coating system was applied on the tubes c of the exhaust manifolds, consists of two-layer systems: a ceramic top coat (TC), made of yttria stabilized zirconia (YSZ), ZrO2-8%Y2O3 and also a metallic bond coat ...
متن کاملTransmission of communicable respiratory infections and facemasks
BACKGROUND Respiratory protection efficiency of facemasks is critically important in the battle against communicable respiratory infections such as influenza and severe acute respiratory syndrome (SARS). We studied the spatial distributions of simulated virus-laden respiratory droplets when human subjects wore facemasks and were exposed to regulatory viral droplets by conducting in vivo experim...
متن کاملEffect of Contact Pressure and Frequency on Contact Heat Transfer Between Exhaust Valve and its Seat
The hot gases produced by the internal combustion engines passes through the exhaust valve and causes high temperatures in the exhaust valve and its seat. To avoid damaging the exhaust valve, heat must be transferred from the valve to its seat during the contact they make at the opening and closing cycle. Heat transfer rate from the exhaust valve to its seat is a function of many factors. One o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of physiological anthropology
دوره 27 2 شماره
صفحات -
تاریخ انتشار 2008