A shoulder-mounted planar antenna for mobile radio applications

نویسندگان

  • Koichi Ogawa
  • Tomoki Uwano
  • Masao Takahashi
چکیده

A new planar antenna, suitable for use on a shoulder, has been studied for police and fire service portable radios in the 350-MHz band. This shoulder-mounted antenna, which is a type of planar inverted F antenna (PIFA), features extreme compactness while maintaining a higher gain than that of a conventional whip antenna and small impedance changes in the presence of a human body. The low-profile structure enables the antenna to be unseen when the operator wears a jacket. A prototype of the antenna has been built and tested, and the measured impedance characteristics and the radiation patterns are presented. Emphasis is placed on the effect of the human body. The antenna provides a gain of 5.5 dBd, which is 3.5 dB higher than that of a whip antenna. Field measurements verified the excellent performance under a multiple propagation environment.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design of Coax-Fed E-Shaped Microstrip Patch Antenna with Triple Bands

Due to its small size, light weight, ease of integration, microstrip patch antenna is been widely applied to the fields of mobile radio, wireless communications, radar systems and so on. This paper presents a method of designing the millimeter-wave microstrip antenna which could be use in government and commercial applications, such as mobile radio and wireless communications that have similar ...

متن کامل

Optimal Load of Flexible Joint Mobile Robots Stability Approach

Optimal load of mobile robots, while carrying a load with predefined motion precision is an important consideration regarding their applications. In this paper a general formulation for finding maximum load carrying capacity of flexible joint mobile manipulators is presented. Meanwhile, overturning stability of the system and precision of the motion on the given end-effector trajectory are take...

متن کامل

UWB Planar Conical Horn-Shaped Self-Complementary Bow-Tie Antenna

An ultra-wideband (UWB) self-complementary planar bow-tie antenna (SCPBTA) is proposed. The antenna consists of a printed conical horn-shaped (CHS) radiator and a counterpart CHS slot etched on a rectangular ground plane. The printed CHS radiator is connected directly to the 50Ω microstrip line by bending the end portion of the feed line. As a result, the antenna has a simple structure which do...

متن کامل

Maximum Allowable Load On Wheeled Mobile Manipulators (RESEARCH NOTE)

This paper develops a computational technique for finding the maximum allowable load of mobile manipulators for a given trajectory. The maximum allowable loads which can be achieved by a mobile manipulator during a given trajectory are limited by the number of factors; probably the dynamic properties of mobile base and mounted manipulator, their actuator limitations and additional constraints a...

متن کامل

A compact stacked Quasi-fractal microstrip antenna for RFID applications

In this paper, we propose a new compact quasi-fractal shaped microstrip antenna that consists of a hexagonal patch as the main radiator and a complementary stacked patch as the parasitic element. The overall surface of the proposed quasi-fractal patch is about 55% lower than the conventional hexagonal patch. Using of stacked technique, the gain reduction of compression technique is almost compe...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • IEEE Trans. Vehicular Technology

دوره 49  شماره 

صفحات  -

تاریخ انتشار 2000